735D Draper Platform

Apply for Financing

Make:

John Deere

Model:

Hydrafloat™ allows the operator to match changing field conditions
Double-cut knife system produces a cleaner cut
Cutterbar is closer to the ground
Stainless-steel feed floor

Specifications
Cutterbar length	10.67 m35 ft
Knife drive	Base: single (combine use only)Optional: dual knife (combine use only)Base: dual knife (SPW only or SPW/combine combination use)
Knife speed	490 cycles/min
Pickup reel operating speeds	6-54 rpm137.2-cm (54-in.) reel: 5-44 rpm
Draper belts speed control	Hydraulic from cab
Type	Straight-line knife drive system
Length	10.67 m35 ft
Knife drive	Base: single (combine use only)Optional: dual knife (combine use only)Base: dual knife (SPW only or SPW/combine combination use)
Knife speed	490 cycles/min
Cutterbar tilt	Base: hydraulic, maximum tilt 9 degree (angle)
Number of slats	Base: six bat polyOptional: eight bat steel (for forage conditions)
Fingers	Base: nylonOptional: steel (typically used in rice or forage conditions)
Diameter	1.067 m3.5 ftFor rice or forage conditions: 1.371 m4.5 ft
Height control	Hydraulic
Speed control	Hydraulic
Reel lift	Cylinder stroke: 330 mm13 in.Total range: 391.5 mm15.4 in.
Reel fore and aft	Cylinder stroke: 359 mm14.1 in.Total range: 620 mm24.4 in.
Reel resume	Base
Reel reverse	Base
Operating speeds	6-54 rpm
Operating speeds (54-in. reel)	5-44 rpm
Width	Rubber coated polyester with V-Guide tracking: 0.7 L24 ozSide belts: 1.02 m3.33 ftCenter belts: 1.4 m4.583 ftCenter belt not included with SPW configuration
Cleat height	25.4 mm1 in.
Operating speed	Side belts: variable up to 223 m/min735 fpmCenter belts: 212 m/min695 fpmCenter belt not included with SPW configuration
Speed control	Hydraulic from cab
Center belt reverse	Base: center belt not included with SPW configuration
Diameter	Two factory-installed options: 356 or 406 mm14 or 16 in.Feed drum not included with SPW configuration
Feed drum fingers	Steel, heavy-duty, and round with breakaway notch and retainerDiameter: 16 mm0.625 in.
Number of fingers	18
Auger finger platform	Dual chevron, retracting
Finger reach	152 mm6 in.
Drum/auger reverse	Base
Operating speed	195 rpm
Center cleanout door	Base
Type	Base: electrohydraulic
Header height sensing on the ground	Base
Header height sensing off the ground	Base
Type	Optional: hydraulic drive
Platform length	11.6 m37.9 ft
Overall operating depth	2.5 m8.2 ft
Transport width, field position	11.4 m37.5 ft
Transport width on wheel, less dividers	2.7 m8.9 ft
Transport length, hitch extended	13.8 m45.4 ft

735D Draper Platform

Two available sizes for a 700D factory-installed center feed drum improves feeding of crop into the combine feeder house

Takes one person a few minutes to convert draper from field to transport without use of tools

Dual-knife drive system is timed

Double-cut knife system produces a cleaner cut

Reel resume and reverse are features on the 700D Drapers

Similar Products

3039R Compact Utility Tractor

5125R Utility Tractor

5115R Utility Tractor

5100R Utility Tractor

5090R Utility Tractor

5115M Utility Tractor

5100M Utility Tractor

5090M Utility Tractor

5067E Utility Tractors

5065E Utility Tractor