725D Draper Platform
Make:
John Deere
Model:
725D Draper Platform
- Hydrafloat™ allows the operator to match changing field conditions
- Double-cut knife system produces a cleaner cut
- Dual-knife drive system is timed
- Cutterbar is closer to the ground
Specifications | |
---|---|
Cutterbar length | 7.8 m25.5 ft |
Knife drive | Base: single (combine use only)Optional: dual knife (combine use only)Base: dual knife (SPW only or SPW/combine combination use) |
Knife speed | 490 cycles/min |
Pickup reel operating speeds | 6-54 rpm137.2-cm (54-in.) reel: 5-44 rpm |
Draper belts speed control | Hydraulic from cab |
Type | Straight-line knife drive system |
Length | 7.8 m25.5 ft |
Knife drive | Base: single (combine use only)Optional: dual knife (combine use only)Base: dual knife (SPW only or SPW/combine combination use) |
Knife speed | 490 cycles/min |
Cutterbar tilt | Base: hydraulic, maximum tilt 9 degree (angle) |
Number of slats | Six bat poly baseEight bat steel optional (for forage conditions) |
Fingers | Base: nylonOptional: steel (typically used in rice or forage conditions) |
Diameter | 1.067 m3.5 ftFor rice or forage conditions: 1.371 m4.5 ft |
Height control | Hydraulic |
Speed control | Hydraulic |
Reel lift | Cylinder stroke: 33 cm13 in.Total range: 39.2 cm15.4 in. |
Reel fore and aft | Cylinder stroke: 35.9 cm14.1 in.Total range: 62 cm24.4 in. |
Reel resume | Base |
Reel reverse | Base |
Operating speeds | 6-54 rpm |
Operating speeds (54-in. reel) | 5-44 rpm |
Width | Rubber coated polyester with V-Guide tracking: 0.7 L24 ozSide belts: 1.02 m3.33 ftCenter belts: 1.4 m4.583 ftCenter belt not included with SPW configuration |
Cleat height | 25.4 mm1 in. |
Operating speed | Side belts: variable up to 223 m/min735 fpmCenter belts: 212 m/min695 fpmCenter belt not included with SPW configuration |
Speed control | Hydraulic from cab |
Center belt reverse | Base: Center belt not included with SPW configuration |
Diameter | Two factory-installed options: 356 or 406 mm14 or 16 in.Feed drum not included with SPW configuration |
Feed drum fingers | Steel, heavy-duty, and round with breakaway notch and retainerDiameter: 16 mm0.625 in. |
Number of fingers | 18 |
Auger finger platform | Dual chevron, retracting |
Finger reach | 152 mm6 in. |
Drum/auger reverse | Base |
Operating speed | 195 rpm |
Center cleanout door | Base |
Type | Base: electrohydraulic |
Header height sensing on the ground | Base |
Type | Optional: hydraulic drive |
Platform length | 8.5 m27.9 ft |
Overall operating depth | 2.4 m7.9 ft |
Transport width, field position | 8.1 m26.5 ft |