730D Draper Platform
Make:
John Deere
Model:
730D Draper Platform
- Hydrafloat™ allows the operator to match changing field conditions
- Dual-knife drive system is timed
- Cutterbar is closer to the ground
Specifications | |
---|---|
Cutterbar length | 9.3 m30.5 ft |
Knife drive | Base: dual knifeOptional: single |
Knife speed | 490 cycles/min |
Pickup reel operating speeds | 6-45 rpm137.2-cm (54-in.) reel: 5-44 rpm |
Draper belts speed control | Hydraulic from cab |
Type | Straight-line knife drive system |
Length | 9.14 m30 ft |
Knife drive | Base: dual knifeOptional: single |
Knife speed | 490 cycles/min |
Cutterbar tilt | Base: hydraulic, maximum tilt 9 degree (angle) |
Number of slats | Base: six bat polyOptional: eight bat steel (for forage conditions) |
Fingers | Base: nylonOptional: steel |
Diameter | 1.067 m3.5 ft |
Height control | Hydraulic |
Speed control | Hydraulic |
Reel lift | Cylinder stroke: 330 mm13 in.Total range: 391.5 mm15.4 in. |
Reel fore and aft | Cylinder stroke: 359 mm14.1 in.Total range: 620 mm24.4 in. |
Reel resume | Base |
Reel reverse | Base |
Operating speeds | 6-54 rpm |
Operating speeds (54-in. reel) | 5-44 rpm |
Width | Rubber coated polyester with V-Guide tracking: 0.7 L24 ozSide belts: 1.02 m3.33 ftCenter belts: 1.4 m4.583 ftCenter belt not included with SPW configuration |
Cleat height | 25.4 mm1 in. |
Operating speed | Side belts: variable up to 223 m/min735 fpmCenter belts: 212 m/min695 fpmCenter belt not included with SPW configuration |
Speed control | Hydraulic from cab |
Center belt reverse | Base: center belt not included with SPW configuration |
Diameter | Two factory-installed options: 356 or 406 mm14 or 16 in.Feed drum not included with SPW configuration |
Feed drum fingers | Heavy-duty and round with breakaway notch and retainerDiameter: 16 mm0.625 in. |
Number of fingers | 18 |
Auger finger platform | Dual chevron, retracting |
Finger reach | 152 mm6 in. |
Drum/auger reverse | Base |
Operating speed | 195 rpm |
Center cleanout door | Base |
Type | Base: electrohydraulic |
Header height sensing on the ground | Base |
Header height sensing off the ground | Base |
Type | Optional: hydraulic drive |
Platform length | 10 m32.9 ft |
Overall operating depth | 2.5 m8.2 ft |
Transport width, field position | 9.9 m32.5 ft |
Transport width on wheel, less dividers | 2.7 m8.9 ft |
Transport length, hitch extended | 12.3 m40.4 ft |