4044R Compact Utility Tractor

Make:

John Deere

Model:

Specials & Promotions

Naturally aspirated diesel engine
PowrReverser™ or eHydrostatic Transmission Options
Cab or Open Station configurations
Premium features: Hitch Assist, Aux Hitch Control, HST controls

Specifications
Engine power (gross)	SAE J1995 rated power: 31.7 kW42.5 hp43.1 PS at 2600 rpm
Power take-off (PTO) power	PowrReverser™ transmission: 25 kW33.6 hpeHydro™ transmission: 24.1 kW32.3 hpPer SAE J1995
Steering hydraulics	23.5 L/min6.2 gpm
Implement hydraulics	42.3 L/min11.2 gpm
Hitch type	Category 1
Lift capacity, 24-in. behind link arms	1135 kg2500 lb
Standard transmission; forward/reverse	eHydro Transmission (eHST)
Cruise control	Standard
Approximate shipping weight (open-station; cab)	OOS - 1710 kg3770 lbCab - 2120 kg4675 lb
Wheelbase	185.5 cm73 in.
Family	EYDXL2.19NDAFYDXL2.19NDAGYDXL2.19NDA
Manufacturer	Yanmar
Engine model	4TNV88C-MJT
Engine power (gross)	SAE J1995 rated power: 31.7 kW42.5 hp43.1 PS at 2600 rpm
Power take-off (PTO) power	PowrReverser transmission: 25 kW33.6 hpeHydro transmission: 24.1 kW32.3 hp
Rated engine speed	2600 rpm
Type	Diesel
Injection pump type	High pressure common rail direct injection
Aspiration	Natural
Emissions compliance	Final Tier 4
Cylinders/displacement	4 / 2.189 L4 / 133.5 cu in.
Number of cylinders	Four
Cylinder liners	Cast-in-block
Bore and stroke	88x90 mm3.46x3.54 in.
Compression ratio	19.1:1
Lubrication	Pressurized
Cooling system	Liquid
Air cleaner	Dual element with electronic restriction indicator
Engine torque at rated speed	116 Nm85.6 lb-ft
Fuel tank capacity	Rollover protective structure (ROPS) - 56.9 L15 U.S. gal.Cab - 52.2 L13.8 U.S. gal.
Battery size	770 CCA
Alternator (12-V)	75 amp
Starter size	2 kW2.68 hp
Type	High pressure common rail direct injection
Standard transmission; forward/reverse	eHydro transmission (eHST)
Optional transmission; forward/reverse	12/12 PowrReverser transmission (PRT)
Left-hand reverser	PRT only
Transmission gear ranges	PRT - 12F/12ReHydro - Infinitely-variable, 3 range
Final drive	Planetary
Brakes	Multi-plate wet disc
Steering	Hydrostatic power steering
Clutch, wet/dry	Wet
Clutch disk diameter wet clutch	129 mm5.08 in.
Axle capacity	Front1600 kg3528 lbRear2400 kg5292 lb
Creeper	SpeedMatch standard
Cruise control	Standard
Differential lock	Yes
Type	Open center
Pump rated output	Steering23.5 L/min6.2 gpmImplement42.3 L/min11.2 gpm65.8 L/min17.4 gpm
Pump type	Single gear
Draft control sensing	Position control
Remote control valves available	Up to six rear remotes
Type	Category 1
Lift capacity, 24-in. behind link arms	1135 kg2500 lb
Standard	Independent540 rpm at 2600 rpm
Optional	540E rpm
Control	Position
Clutch	Wet disc
Crankcase with filter	5.3 L1.4 qt
Transmission and hydraulic system	47.3 L12.5 gal.
Type	Planetary
Differential lock	Yes
Rollover protective structure	TypeFoldableYes
Platform - flat/straddle	Flat
Gear shift location - console/floor	PRT - Left-hand side
Compliance	OSHA, SAE, ASAE
Visibility	360 degree (angle)
Air conditioning, temperature differential	14.4 °C58 °F
Doors	Two
Noise rating	78 dBA
Seat equipment	Air suspension with swivel
Wheelbase	185.5 cm73 in.
Front axle clearance	35.1 cm13.8 in.
Turning radius with brakes	2.8 m9.17 ft
Turning radius without brakes	3 m9.84 ft
Approximate shipping weight (open-station; cab)	OOS - 1710 kg3770 lbCab - 2120 kg4675 lb
Front	Farm - 8-16Turf - 27x10.5-15 or 27x12LL-15Industrial - 10-16.5
Rear	Farm - 13.6-28Turf - 44x18-20 or 22.5LL-16.1Industrial - 16.9Lx24
Front tread range	148.1 cm58.3 in.
Rear tread spacing	137.2 cm54 in.