3035D Compact Tractor
Make:
John Deere
Model:
3035D Compact Tractor
Specials & Promotions
1-3 Series Compact Tractors Special Financing!
See Details
Tractor-Parts-A-Thon
See Details
Monthly Attachment Program: August
See Details
- Standard 4wd for Maximum Traction
- Heavy duty drive train with a gear drive transmission 8F/8R
- On-board diagnostics including Service Advisor
- See Ways To Save
Specifications | |
---|---|
Engine power (gross) | SAE J1995 rated power: 25.5 kW34.2 hp34.7 PS at 2800 rpm |
Power take-off (PTO) power | 22.7 kW30.4 hp |
Steering hydraulics | 16.8 L/min4.4 gpm |
Implement hydraulics | 22.4 L/min5.9 gpm |
Hitch type | Category 1 |
Lift capacity, 24-in. behind link arms | 944 kg2081.2 lb |
Standard transmission; forward/reverse | 8F/8R synchromesh shuttle shift gear transmission |
Cruise control | No |
Approximate shipping weight (open-station; cab) | Open operator station (OOS): 1275 kg2811 lbCab: Not applicable |
Wheelbase | 1574 mm62 in. |
Manufacturer | Yanmar® |
Engine model | 3TNV88C-KJPT |
Engine power (gross) | SAE J1995 rated power: 25.5 kW34.2 hp34.7 PS at 2800 rpm |
Power take-off (PTO) power | 22.7 kW30.4 hp |
Rated engine speed | 2800 rpm |
Injection pump type | High pressure common rail direct injection |
Aspiration | Natural |
Emissions compliance | Final Tier 4 |
Cylinders/displacement | 3 / 1.64 L3 / 100.2 cu in. |
Number of cylinders | Three |
Cylinder liners | Cast-in-block |
Bore and stroke | 88 x 90 mm3.46 x 3.54 in. |
Compression ratio | 19.1:1 |
Lubrication | Pressurized |
Cooling system | Liquid |
Air cleaner | Dual element |
Engine torque at rated speed | 87 Nm64.2 lb-ft |
Fuel tank capacity | 36.7 L9.7 U.S. gal. |
Battery size | 600 CCA |
Alternator (12-V) | 55 amp |
Starter size | 1.4 kW1.9 hp |
Type | High pressure common rail direct injection |
Standard transmission; forward/reverse | 8F/8R synchromesh shuttle shift gear transmission |
Left-hand reverser | Yes |
Transmission gear ranges | Four gears and two ranges |
Final drive | Spur gear |
Brakes | Wet disk |
Steering | Power steering |
Axle capacity | Front880 kg1940 lbRear1600 kg3527 lb |
Creeper | No |
Cruise control | No |
Differential lock | Yes |
Type | Open center |
Pump rated output | Steering16.8 L/min4.4 gpmImplement22.4 L/min5.9 gpm39.2 L/min10.3 gpm |
Pump type | Single gear |
Maximum operating pressure | 172 bar2495 psi |
Draft control sensing | Position control |
Remote control valves available | Up to two (optional) |
Type | Category 1 |
Lift capacity, 24-in. behind link arms | 944 kg2081.2 lb |
Standard | At 2400 rpm: 540 rpm |
Control | Mechanical |
Clutch | Transmission |
Brake (for mid and rear PTO) | Wet disk |
Crankcase with filter | 4.5 L4.8 qt |
Transmission and hydraulic system | 33 L34.8 qt |
Type | Spur gear |
Rollover protective structure | TypeFoldableASABE S478 |
Platform - flat/straddle | Straddle |
Gear shift location - console/floor | Right-hand side |
Wheelbase | 1574 mm62 in. |
Front axle clearance | Minimum: 331 mm13 in.Maximum: 353 mm13.9 in. |
Turning radius with brakes | 1.63 m5.3 ft |
Approximate shipping weight (open-station; cab) | OOS: 1275 kg2811 lbCab: Not applicable |
Front | R1 Bar: 7-14R3 Turf: 27x8.5-15R4 Industrial: 25x8.5-14 |
Rear | R1 Bar: 11.2-24R3 Turf: 41x14-20R4 Industrial: 15-19.5 |
Toolbox | Yes |
Tilt steering wheel | No |
12-V Outlet | No |