3025E Compact Utility Tractor
Make:
John Deere
Model:
3025E Compact Utility Tractor
Specials & Promotions
3025E/Loader/Tiller – “My Little Farm Efficiency Package”
3025E w/ Loader and Frontier RT3062 Tiller
See Details
1-3 Series Compact Tractors Special Financing!
See Details
Fall Into Savings – Compact Utility Tractors
See Details
Tractor-Parts-A-Thon
See Details
Monthly Attachment Program: August
See Details
- Standard four-wheel drive (4WD) for maximum traction
- Tightest turning radius in its horsepower class
- Hydro transmission with Twin Touch™ pedals for ease of use
Specifications | |
---|---|
Engine power (gross) | SAE J1995 rated power: 18.2 kW24.4 hp24.7 PS at 2400 rpm |
Power take-off (PTO) power | 13 kW17.4 hp |
Steering hydraulics | 15 L/min4 gpm |
Implement hydraulics | 20.2 L/min5.3 gpm |
Hitch type | Category 1 |
Lift capacity, 24-in. behind link arms | 615 kg1356 lb |
Standard transmission; forward/reverse | Hydrostatic transmission (HST) |
Cruise control | Optional |
Approximate shipping weight (open-station; cab) | Open operator station (OOS): 1181 kg2603 lbCab: Not applicable |
Wheelbase | 1593 mm62.7 in. |
Family | EYDXL1.64NDAFYDXL1.64NDAGYDXL1.64NDA |
Manufacturer | Yanmar |
Engine model | 3TNV88F-EPJT2 |
Engine power (gross) | SAE J1995 rated power: 18.2 kW24.4 hp24.7 PS at 2400 rpm |
Power take-off (PTO) power | 13 kW17.4 hp |
Rated engine speed | 2400 rpm |
Type | Diesel |
Injection pump type | Direct injection |
Aspiration | Natural |
Emissions compliance | Final Tier 4 |
Cylinders/displacement | 3 / 1.64 L3 / 100.2 cu in. |
Number of cylinders | Three |
Cylinder liners | Cast-in-block |
Bore and stroke | 88 x 90 mm3.46 x 3.54 in. |
Compression ratio | 19.1:1 |
Lubrication | Pressurized |
Cooling system | Water pump |
Air cleaner | Dual element |
Engine torque at rated speed | 72.4 Nm53.4 lb-ft |
Fuel tank capacity | 28.5 L7.5 U.S. gal. |
Battery size | 500 CCA |
Alternator (12-V) | 55 amp |
Starter size | 1.4 kW1.9 hp |
Type | Direct injection |
Standard transmission; forward/reverse | Hydrostatic transmission (HST) |
Left-hand reverser | No |
Final drive | Spur gear |
Brakes | Wet disk |
Steering | Power steering |
Axle capacity | Front880 kg1940 lbRear1200 kg2645 lb |
Creeper | No |
Cruise control | Optional |
Differential lock | Yes |
Type | Open center |
Pump rated output | Steering15 L/min4 gpmImplement20.2 L/min5.3 gpm35.2 L/min9.3 gpm |
Pump type | Dual gear |
Maximum operating pressure | 172 bar2495 psi |
Draft control sensing | Position control |
Remote control valves available | Up to two (optional) |
Type | Category 1 |
Lift capacity, 24-in. behind link arms | 615 kg1356 lb |
Standard | Rear - 540 rpm |
Control | Independent |
Clutch | Wet disk |
Brake (for mid and rear PTO) | Wet disk |
Crankcase with filter | 4.5 L4.8 qt |
Transmission and hydraulic system | 20.8 L22 qt |
Type | Spur gear |
Rollover protective structure | TypeFoldable |
Platform - flat/straddle | Straddle |
Gear shift location - console/floor | Left-hand side |
Wheelbase | 1593 mm62.7 in. |
Front axle clearance | Minimum: 299 mm11.8 in.Maximum: 333 mm13.1 in. |
Turning radius without brakes | 2.9 m9.4 ft |
Approximate shipping weight (open-station; cab) | OOS: 1181 kg2603 lbCab: Not applicable |
Front | R1 Bar: 7-14R3 Turf: 27x8.5-15R4 Industrial: 25x8.5-14R4 Industrial: 27x8.5-15 |
Rear | R1 Bar: 11.2-24R3 Turf: 41x14-20R4 Industrial: 15-19.5R4 Industrial: 43x16-20 |