X590 Lawn Tractor with 54-in. Deck

Make:

John Deere

Model:

25.5-hp (19.0 kW)* iTorque™ Power System
54-in. (137 cm) Accel Deep™ Deck, compatible with optional MulchControl™ kit with one-touch technology
Electronic throttle control and power two-wheel steer
4 year/500 hour bumper-to-bumper warranty

Specifications
Engine power	25.5 hp19 kW
Oil change	No-tools oil drain with replaceable filter
Engine manufacturer/model	FS730 EFI
Transaxle type	K72 hydrostatic integrated with transaxle
Transaxle control	Twin Touch™ pedals
Rear tires	24x12-12 HDAP
Lift system type	Hydraulic
Cutting width	Accel Deep™ mower deck, 54 in.137 cm
U.S. warranty	4 year/500 hour bumper-to-bumper (Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)
Power	25.5 hp19 kW
Displacement	44.3 cu in.726 cc
Manufacturer/model	FS730 EFI
Type	Electronic fuel injection (EFI), overhead valve, full-pressure lube, oil filter
Cylinders	V-twin, cast-iron liners
Governor	Constant-speed electronic throttle control
Choke/speed control	No choke required
Cooling method	Air
Air cleaner	Dry, replaceable with foam precleaner
Oil change	No-tools oil drain with replaceable filter
Type	Gasoline
Fuel delivery	Open-loop electronic fuel injection (EFI)
Fuel gauge	Gauge on dash
Fuel tank location	Rear
Fuel fill opening	On left fender, 3 in.7.6 cm
Fuel tank capacity	4.4 U.S. gal.16.7 L
Battery	12 V500 CCA
Charging system	Flywheel alternator, regulated, 15 amp
Engine starter	Solenoid shift
Hourmeter	Yes
Headlights	Two standard, incandescent, 27 W
Taillights or reflector	Reflectors
Backup lights	No
Rear work lights	No
12-V outlet	Yes
Type	K72 hydrostatic integrated with transaxle
Control	Twin Touch™ pedals
Cruise control	Yes, button on dash
Oil cooler	Fins and fan on transaxle
Oil filter	Yes, replaceable
Differential lock	Standard
Forward speed	0-7.2 mph0-11.6 km/h
Reverse speed	0-5.2 mph0-8.4 km/h
Brakes	Internal wet disc
Frame	Welded heavy-duty
Primer/paint	E-coat/powder
Weight bracket	Standard front and rear - each holds up to four Quik-Tatch weights, 42 lb19 kg
Receiver hitch	No
Front axle	Cast iron front axle, front wheel ball bearings
Spindle bushings	Metal, replaceable
Front tires	16x6.5-8 turf
Rear tires	24x12-12 HDAP
Hood material	Fully enclosed, molded-in color material reduces sound, will not rust or dent
Fender deck material	Stamped steel
Floor mats	Sure-grip rubber
Storage	Yes, under seat and covered toolbox
Service interval decal	Yes
Fender handles/grips	Handles
Cup holder	Yes
Equipment mounting	Yes, heavy duty
Type	Power, hydraulic
Four-wheel steer	Not available on this model
Steering wheel	14 in.35.6 cm
Tilt steering wheel	Standard, five position
Turning radius	22 in.55.9 cm
Uncut circle radius	24 in.61 cm
Type	Cut-and-sewn high-back
Seat back height	21 in.53 cm
Armrests	Optional
Fore-aft adjustment	While seated, slide rail, 15-position, 6.6 in.17 cm
Seat suspension	Tilt, two coil springs, three-position no-tools adjustment for operator weight
Type	Hydraulic
Hydraulic outlets	No
Mower cut height	13 positions, 1-4 in.2.5-10.2 cm
Cut height increments	0.25 in.0.64 cm
Preset cut height	Yes
Type	Side discharge
Cutting width	Accel Deep™ mower deck, 54 in.137 cm
Construction	Stamped steel deck shell
Mower deck material	10 gauge0.135 in.3.4 mm
Mower wash port	Yes
Mower drive system	Electric power take-off (PTO) clutch, in-line belt
Mower wheels	Four
Mower wheel adjustment	Seven-position, spring-loaded pin
Mower level adjustment	Exact Adjust ports and onboard deck-leveling gauge
Type	Roll under tractor
Front draft arms	Attached with spring pins at two points
Rear draft arms	Quick-pull pins
Mower wheels rotate	Yes, 90 degrees for easy mower removal
Drive system	Dual belt
Meets ANSI standard	Yes
Meets OPEI standard	Yes
Backup protection	Reverse Implement Option (RIO)
Safety video	Yes
Notes	Heavy-duty garden tractor transaxleConvenient power steering and hydraulic liftBuilt-in front and rear weight brackets
Warranty	4 year/500 hour bumper-to-bumper (Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)
Mowers	54A (standard)
Rear bagger	7, 14, 19 bu247, 493, 670 L
Powered material collection	Power Flow™ blower
Mulching system	Yes, MulchControl™
Front thatcher	38, 46, 54 in.96.5, 116.8, 137.2 cm
Front blade	48 in.121.9 cm
Snow blower	Two-stage, 47 in.119.4 cm
Rotary tiller	Mechanical, 30 in.76.2 cmHydraulic, 42 in.106.7 cm
Sleeve hitch	Yes, implements include box scraper, rear blade, plow, disk, and cultivator
Plow, moldboard	Yes
Box scraper	Yes
Cultivator	Yes
Rear blade	Yes
Sprayer	Tow-behind, 15, 25 U.S. gal.56.8, 94.6, 170.3 LMounted, 25 U.S. gal.94.6 L
Spreader	125, 175 lb57.7, 79.4 kgMounted, 125 lb57.7 kg
Front bumper	Standard front bumper/weight bracket
Brush guard	Yes
Weather protection	Weather enclosure
Sun canopy	Yes
Bucket holder	Yes, double bucket
Grass striping	Lawn striping kit
Tractor shovel	40 in.101.6 cm
Tow-behind tools	19
Height	52.25 in.132.7 cm
Overall length	79 in.201 cm
Wheelbase	51.2 in.130 cm
Width with mower	68.4 in.174 cm
Width with mower (deflector raised for storage)	59.4 in.151 cm
Width without mower	41 in.104.1 cm
Weight	Mower, no fuel: 805 lb365 kg
Manufacturing location	Horicon, Wisconsin, USA
Date collected	27-Jul-2020