7R 350 Tractor

Make:

John Deere

Model:

7R 350 Tractor

Engine HP¹: 385 Max | 350 hp Rated
Fully integrated precision ag technology
Infinitely Variable Transmission (IVT™)
Three cab and visibility packages available to customize your tractor
Industry-leading power transfer with Cat 4 HD drawbar for heavier implements

¹Engine power PS (hp ISO) at max engine power speed (ECE-R120). John Deere Standard RES10080, SAE Standards J1995.

Specifications
Engine description	John Deere PowerTech™ (B20 diesel compatible) 9.0L
Engine displacement	9 L549 cu in.
Rated engine power	ECE-R120: 257 kW350 hp
Maximum engine power	ECE-R120: 283 kW385 hp
Rated PTO power (hp SAE)	193 kW260 hp
Transmission type	Standard: John Deer Infinitely Variable transmission (IVT™): 0.05-42 km/h0.03-26 mphOptional: John Deere IVT: 0.05-50 km/h0.03- 31 mph
Hydraulic pump rated output	Standard: 63 cc: 162 L/min43 gpmOptional: 85 cc: 222.3 L/min59 gpm
Rear hitch category (SAE designation)	Standard: Category 3N/3 with Quik-CouplerOptional: Category 3/3N with hook endsCategory 3N/3 with hook ends
Base machine weight	VT, TLS, 480/80R50 tires: 11,000 kg24,300 lb
Description	John Deere PowerTech™ (B20 diesel compatible) 9.0L
Engine type	Diesel, in-line, 6-cylinder, wet-sleeve cylinder liners with four valves in head
Engine family	MJDXL09.0319
Rated speed	2100 rpm
Aspiration	Single turbocharger, variable geometry turbo
Emission level	Final Tier 4
After treatment type	Diesel oxidation catalyst (DOC)/diesel particulate filter (DPF)
Displacement	9 L549 cu in.
Rated power	ECE-R120: 257 kW350 hp
Rated PTO power (hp SAE)	193 kW260 hp
Power boost	IPM: 18.6 kW25 hp
Maximum engine power	ECE-R120: 283 kW385 hp
Engine peak torque	At 1600 rpm: 1,580 Nm1,165 lb-ft
PTO torque rise	40 percent
Type	Standard: John Deere IVT: 0.05-42 km/h0.03-26 mphOptional: John Deere IVT: 0.05-50 km/h0.03- 31 mph
Type	Closed-center, pressure-and-flow compensated system with load sensing
Pump rated output	Standard: 63 cc: 162 L/min43 gpmOptional: 85 cc: 222.3 L/min59 gpm
Available flow at a single rear SCV	132 L/min35 gpm
Available flow at front SCVs	126 L/min33 gpm
Number of rear selective control valves (SCVs)	Standard: Four SCVsOptional: Three to six ISO couplers: 12.7 mm0.5 in.Five ISO couplers (SCV 1: 19 mm [0.75 in.] , SCV 2-5: 12.7 mm [0.5 in.])
Number of front selective control valves (SCVs)	One with front hitch
SCV control	Electronic
Hitch category (SAE designation)	Standard: Category 3N/3 with Quik-CouplerOptional: Category 3/3N with hook endsCategory 3N/3 with hook ends
Maximum lift capacity behind lift points	Standard (Category 3): 6,894 kg15,200 lbOptional (Category 3N): 7,847 kg17,300 lbStandard (Category 3 with hook ends): 6,894 kgOptional (Category 3N with hook ends): 7,847 kg
Sensing type	Electrohydraulic
Drawbar category	Standard: Category 4
Maximum vertical load	Standard: Category 4: 4,990 kg11,000 lb
Type	IndependentStandard: 44.45 mm (1.75 in.) 20-spline, 1,000 rpmOptional: 44.45 mm (1.75 in.), 20-spline, 1,000 rpm capable of 35-mm (1.375-in.) 540/1000 rpm44.45 mm (1.75 in.) 20-spline, 1,000 rpm with 35-mm (1.375-in.) 540E/1000/1000E rpm gearcase44.45 mm (1.75 in.) 20-spline, 1,000 rpm with 35-mm (1.375-in.) 540/540E/1000 rpm gearcase
Engine rpm (at rated PTO speeds)	540/1000 PTO rpm at 1950 engine rpm540E/1000E PTO rpm at 1750 engine rpm
PTO actuation	Electric switch with adjustable modulation
Category	Category 3N, ground engaging
Electric power	Seven-pin connector
Standard lift capacity	5,200 kg11,464 lb
Front power take-off (PTO)	Available: 35 mm (1.375 in.) 21 spline, 1,000 rpm, counter-clockwise rotation (when facing PTO)Available through Parts: 44.45 mm (1.75 in.), 20 spline, 1,000 rpm, counter-clockwise rotation (when facing PTO)
PTO speed	1,000 PTO rpm at 1940 engine rpm
Type	Standard: Rack-and-pinion or flange axlesOptional: Diameter: 120 x 2550 mm4.72 x 100.4 in.Diameter: 120 x 3010 mm4.72 x 118.5 in.Flanged axle: 335 mm mm13.2 in.
Final drive type	Inboard planetary three pinion
Rear differential lock	Full-locking electrohydraulic
Type	Standard: TLS with front brakes
Front axle differential lock	Full-locking electrohydraulic (actuated at same time as rear diff lock)
Rear	RCI Group 48/49
Turning radius with brakes	600/70R30 group 43 tires at 188.2-cm (74.1-in.) spacing, TLS: 6.7 m22 ft620/75R30 group 44 tires at 208.3-cm (82-in.) spacing, TLS: 8.7 m28.5 ft
Alternator size	Standard: 210 ampOptional: 250 amp
Battery options	12 V
Working lights	Standard: 18 halogenAvailable: 18 LED22 LED
Type of bulb in headlight (Halogen, Zenon, LED)	Standard: 65-W halogenAvailable: LED
Total cold cranking amps	With two 925-CCA group 31 batteries: 1850 CCA
Seat	Degree of seat swivel, left handOptional: 25 degreeDegree of seat swivel, right hand40 degreeStandard: air suspensionOptional: ActiveSeat™ II
Cab suspension	Optional
Instructional seat	Standard
Display	Standard: 4600 Generation 4 CommandCenter™ with 25.4-cm (10 in.) display
Radio	Standard: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna
Inner cab volume	3.24 m3114 cu ft
Cab glass area	6.56 m270.61 sq ft
Wheelbase	2,925 mm115.2 in.
Overall length	5,540 mm218 in.
Drawbar clearance	Group 48 rear tires: 415 mm16.3 in.Group 49 rear tires: 461 mm18.1 in.
Base machine weight	IVT, TLS, 480/80R50 tires: 11,000 kg24,300 lb
Maximum ballast level	SAE PTO hp: 61.2 kg135 lb
Crankcase oil volume	23 L6.1 gal.
Fuel tank	IVT: 513 L135 U.S. gal.
Diesel exhaust fluid (DEF) tank	26.2 L6.9 U.S. gal.
Cooling system	44.5 L11.8 U.S. gal.
Transmission-hydraulic system	160 L42.3 U.S. gal.
Interval for engine oil change	500 hours
Interval for hydraulic/transmission oil change	1,500 hours
Interval for engine coolant change	6,000 hours
Loader	700M
Lift capacity at full height	2,417 kg5,304 lb
Maximum lift height	4,741 mm186 in.
Guidance	Integrated AutoTrac™
Telematic	JDLink™
Remote diagnostics	ServiceADVISOR™ remote: available with JDLink hardware and activationsRemote Display Access: available with JDLink hardware and activations
Country of manufacture	USA