2720 Disk Ripper

Make:

John Deere

Model:

2720 Disk Ripper

Bury residue to 15-in. (38.1 cm) depths
Improved residue flow in wet conditions
The most level soil profile from a ripper
Exclusive hydraulic rolling basket option

Specifications
Working width	3.8-8.4 m12.5-27.5 ft
Transport width	With furrow filler attachment: 5.2-5.6 m16.9-18.4 ft
Maximum operating depth	40.6 cm16 in.
Operating speed	8-11.3 km/h5-7 mph
Horsepower required per standard	66-75.6 kW41-47 hp
Standards	Spacing76.2 cm30 in.
Configuration	Disk - Ripper - Disk - Conditioner
Option 1	Rigid 5-standard on spacing of 76.2 cm30 in.
Option 2	Rigid 7-standard on spacing of 76.2 cm30 in.
Option 3	Gang-fold rigid 7-standard on spacing of 76.2 cm30 in.
Option 4	3-section flex-fold 9-standard on spacing of 76.2 cm30 in.
Option 5	3-section flex-fold 11-standard on spacing of 76.2 cm30 in.
Option 1	3.8 m12.5 ft
Option 2	5.3 m17.5 ft
Option 3	5.3 m17.5 ft
Option 4	6.9 m22.5 ft
Option 5	8.4 m27.5 ft
Option 1	With furrow filler attachment: 5.2 m16.9 ft
Option 2	With furrow filler attachment: 6.8 m22.4 ft
Option 3	With furrow filler attachment: 5.5 m18 ft
Option 4	With furrow filler attachment: 5.6 m18.4 ft
Option 5	With furrow filler attachment: 5.6 m18.4 ft
Option 1	Single-point crank
Option 2	TruSet™ tillage
Option 1	2 SCVs (depth control, optional rolling baskets) at 17,237 kPa2,500 psifor optimum raise times
Option 2	3 SCVs (depth control, wingfold, optional rolling baskets) at 17,237 kPa2,500 psifor optimum raise times
Design	Single hitch tube: 15.2x25.4 cm6x10 in.
Fore-aft adjustment	Hitch turnbuckle
Spacing	76.2 cm30 in.
Trip force	Cushion-trip standard: 1,859.7 kg4,100 lb
Trip height	Shear bolt protected above: 33 cm13 in.
Type	Parabolic with or without wear shins, straight with wear shins
Type	Wingless, LaserRip™ II points: 12.7 cm5 in.17.8 cm7 in.25.4 cm10 in.
Coverboards	Parabolic cushion-trip standards with wear shins and holes to mount coverboards
Description	Disk - Shank - Disk configuration
Depth control	TruSet in-cab controlsSingle-point depth control
Maximum depth	15.2 cm6 in.
Type of standard	C-spring
Base equipment blades	Solid spherical low-concavity disk blades: 610x6.5 mm24x0.256 in.
Blade spacing	27.9 cm11 in.
Front frame angle	Fixed: 18 degree (angle)
Rear frame angle	14-16 degree (angle)
Bearings	Sealed, maintenance-free
Scraper	Heavy-duty floating combination scraper (base option)
Option 1	Hydraulically adjustable finishing attachmentsKnife-edge rolling basketRound-bar rolling basket