- Reduce service time with Quick Change Knives
- Updated design and styling
- Impeller, urethane or V-10 conditioners
- Gear-driven cutting platform
- Adjustable gauge shoes
Specifications | |
---|---|
PTO speed | 1000 rpm |
1000 rpm 1-3/8 in. PTO | 90-150 hp68-112 kW |
Standard hitch | Clevis |
Optional hitch | Equal angle, Rockshaft swivel or Drawbar swivel |
Hydraulic pressure required | 13,790 kPa2,000 psi |
Cutterbar - cutting width | 3.5 m11.5 ft |
Number of disks/knifes | 714 |
Transport width | 3.5 m11.5 ft |
Tractor connection | 21 spline |
Standard hitch | Clevis |
Optional hitch | Equal angle, Rockshaft swivel or Drawbar swivel |
Hydraulic pressure required | 13,790 kPa2,000 psi |
Type | John Deere |
Cutting width | 3.5 m11.5 ft |
Cutting height | 2.8-9.8 cm1.1-3.8 in. |
Number of disks | 7 |
Number of knives | 14 |
Disk speed | 2,650 rpm |
Knife tip speed | 307 km/h191 mph |
Disk drive | Gear |
Lubrication | Hy-Gard oil |
Oil reservoir capacity | 8 L8.5 U.S. qt |
Cutterbar oil check | Combination check, drain plug |
Angle adjustment | Manual or hydraulic |
Angle range | 2-8 degree (angle) |
Cutterbar protection | ShearHub |
Adjustable gauge shoes | Yes |
Width | 236 cm92.7 in. |
Diameter | 25.4 cm10 in. |
Tines type | V-tines |
Number of tines | 57 |
Number of speeds | Two |
Drive | 3-V powerband belt and sheaves |
Width | 236 cm92.7 in. |
Diameter | 25.4 cm10 in. |
Type of material | Urethane or Steel |
Design | Urethane: Recessed cleat, Steel: Intermeshing flutes V-10 |
Speed | 664 rpm |
Transport width | 3.5 m11.5 ft |
Transport length | 6.2 m20.6 ft |
Weight, impeller conditioner | 2,233 kg4,923 lbWith Urethane roll conditioner: 2,388 kg5,264 lbWith Steel roll conditioner: 2,450 kg5,400 lbWith Impeller roll conditioner: 2,233 kg |
Standard tires | 11L-15 standard, 31x13.5L 15 optional31x13.5L 15 optional |