<ul>
<li>Quick Change Blade enhancement of the ProSeries™ Opener reduces change time by up to 45%1</li>
<li>Electric drive with Section Control</li>
<li>Wide variety of working widths and row spacings </li>
<li>Premium Lighting and easier access to meters </li>
</ul>

N536C Air Drill Central Commodity System (CCS™)

Agriculture

<ul>
<li>AutoConnect™ deck compatible for deck attach/detach in seconds</li>
<li>Cab or Open Station configuration available</li>
<li>PowrReverser™ or E-hydro transmission with Twin Touch™ pedals</li>
</ul>

3039R Compact Utility Tractor

Key Features
<ul>
<li>Engine Power: 125 hp</li>
<li>Easy to use transmission</li>
<li>NEW integrated technologies (JDLink™, AutoTrac™)</li>
<li>NEW optional suspended front axle</li>
</ul>

5125r-tractor

5125R Utility Tractor

Key Features
<ul>
<li>Engine Power: 115 hp</li>
<li>Easy to use transmission</li>
<li>NEW integrated technologies (JDLink™, AutoTrac™)</li>
<li>NEW optional suspended front axle</li>
</ul>

5115r-tractor

5115R Utility Tractor

Key Features
<ul>
<li>Engine Power: 100 hp</li>
<li>Easy to use transmission</li>
<li>NEW integrated technologies (JDLink™, AutoTrac™)</li>
<li>NEW optional suspended front axle</li>
</ul>

5100r-tractor

5100R Utility Tractor

Key Features
<ul>
<li>Engine Power: 90 hp</li>
<li>Easy to use transmission</li>
<li>NEW integrated technologies (JDLink™, AutoTrac™)</li>
<li>NEW optional suspended front axle</li>
</ul>

5090r-tractor

5090R Utility Tractor

Key Features
<ul>
<li>PowrQuad PLUS 16F/16R or Powr8 32F/16R transmission options</li>
<li>Climate-controlled cab</li>
<li>Hitch lift capacity of 6,970 lbs. with an option of 7,860 lbs.</li>
<li>Integrated AutoTrac™ guidance</li>
</ul>

5115m-powrquad-pluspowr8-utility-tractor

5115M Utility Tractor

<div class="key_features">Key Features
<ul>
<li>PowrQuad PLUS 16F/16R or Powr8 32F/16R transmission options</li>
<li>Climate-controlled cab</li>
<li>Hitch lift capacity of 6,970 lbs. with an option of 7,860 lbs.</li>
<li>Integrated AutoTrac™ guidance</li>
</ul>
</div>

5100m-powrquad-pluspowr8-utility-tractor

5100M Utility Tractor

<ul>
<li>PowrQuad PLUS 16F/16R or Powr8 32F/16R transmission options</li>
<li>Climate-controlled cab</li>
<li>Hitch lift capacity of 6,970 lbs. with an option of 7,860 lbs.</li>
<li>Integrated AutoTrac™ guidance</li>
</ul>

5090m-powrquad-pluspowr8-utility-tractor

5090M Utility Tractor

<ul>
<li>2WD or MFWD</li>
<li>5-year Powertrain warranty*</li>
<li>Available in premium cab, standard cab or open operator station</li>
<li>No Regen required</li>
</ul>

5067E Utility Tractors

<div class="key_features">
<ul>
<li>67 engine hp</li>
<li>Best-in-class visibility</li>
<li>Thick comfortable seat</li>
<li>5-Year Powertrain Warranty</li>
</ul>
</div>
<a class="no_show_m btn btn-larger btn-primary btn-product btn-raq various" href="https://www.agprocompanies.com/new-equipment/agriculture/tractors/5-series-tractors/small-frame/5065e-utility-tractor/#inquire">REQUEST A QUOTE</a>

5065e-utility-tractor

5065E Utility Tractor

John Deere

<ul>
<li>Mow up to 2 acres</li>
<li>23 HP* (17 kW) V-Twin engine</li>
<li>48- and 54-in. (122- and 137 cm) forged Accel Deep™ Mower Decks available</li>
<li>20-inch (50.8 cm) high-back custom-tailored seat with arm rests</li>
<li>LED lights, floor mat, front bumper, rear hitch, covered storage come standard</li>
<li>3-year/200-hour bumper-to-bumper warranty**</li>
</ul>

Z330R ZTrak™ Mower with 48-in. Deck

<ul>
<li>Mow up to 2 acres</li>
<li>23 HP* (17 kW) V-Twin engine</li>
<li>48- and 54-in. (122- and 137 cm) forged Accel Deep™ Mower Decks available</li>
<li>20-inch (50.8 cm) high-back custom-tailored seat and standard rear hitch</li>
<li>3-year/200-hour bumper-to-bumper warranty**</li>
</ul>

Z330M ZTrak™ Mower with 48-in. Deck

<ul>
<li>48-inch (122-cm) floating mower deck</li>
<li>Powerful 19 hp (14.2 kW) V-twin engine</li>
<li>Self-propelled hydrostatic drive system</li>
<li>Easy-to-use controls for operator comfort and convenience</li>
</ul>

W48R Commercial Walk-Behind Mower

Rippers

Semi-Mounted Rotary Rakes

Horizontal Fold Disc Mowers

Front Mounted Disc Mowers

Professional-Duty Roadside Mowers

Vari-Manager Series

Vertical Fold Disc Mowers

Landscape and Estate Shredders

Trailed Round Bale Wrappers

Trailed Square Bale Wrappers

Seeding Equipment

<ul>
<li>Choice of auger or conveyor</li>
<li>Stationary single-shoot manifold</li>
<li>In-line drive system transfers power efficiently</li>
<li>New 550-bushel grain tank capacity on tow-behind models</li>
</ul>

1910 Tow-Behind Air Commodity Cart

<ul>
<li>Productive seedbox capacities</li>
<li>Double-disk furrow openers</li>
<li>Reliable, durable convoluted seed tubes</li>
<li>Seed metering system</li>
</ul>

1520 Integral Drill

<ul>
<li>Quick Change Blade enhancement of the ProSeries™ Opener reduces change time by up to 45%1</li>
<li>Wide variety of working widths and row spacings</li>
<li>Latest John Deere technologies</li>
<li>Premium Lighting and easier access to meters </li>
</ul>

N542C Air Drill Central Commodity System (CCS™)

<ul>
<li>Positive depth control features and options</li>
<li>Choice of ground-engaging openers</li>
<li>Longer machine life with flexible frame</li>
<li>Remote height sensors</li>
</ul>

1830 Air Hoe Drill

<ul>
<li>Productive Seedbox capacities</li>
<li>Easy-to-read seed level indicator</li>
<li>Accurate fertilizer metering</li>
<li>Box drill acremeter</li>
</ul>

1590 No-Till Drill

<ul>
<li>Accurate seed metering capability</li>
<li>Wide variety of working widths and row spacings</li>
<li>Ground drive system with dual-range sprocket</li>
<li>Durable mainframe and wings</li>
</ul>

1990 Central Commodity System (CCS™)

<ul>
<li>Tow-behind</li>
<li>650-bushel (22.9-cu m) capacity</li>
<li>Fill all four tanks as quickly as 20 minutes*</li>
<li>Calibrate rate in half the time</li>
</ul>
*Fill time compared to 1910 550 TBH based on Internal John Deere testing.

C650 Air Cart

<ul>
<li>850-bushel (30-cu m) capacity</li>
<li>170 acres (69 ha) per fill</li>
<li>Calibrate rate in half the time</li>
</ul>

C850 Air Cart

<ul>
<li>Patented active hydraulic down-pressure system</li>
<li>Double-disk furrow openers</li>
<li>Seedbox capacities</li>
<li>Grass seed attachment</li>
</ul>

455 Front-Folding Grain Drill

View Product Brochure

Harvesting equipment, cutters, shredders, hay &amp; forage equipment, planting &amp; seeding equipment, sprayers and tillage equipment

BALR: Farm Equipment

<div>
To win big in small grains, it takes a seeding solution that superseeds your expectations. John Deere delivers with a complete line of everything you need – and the sizes you want – to seed for success. Air-hoe drills. Commodity air carts. No-till air drills. Openers. Fertilizer attachments. Central commodity systems. Box drills. Plus precision ag technology to stretch your productivity to higher levels. But it’s far more than iron and technology. It’s the exceptional agronomic know-how and unsurpassed dealer support in all phases of production to keep you running. With our latest additions to equipment and openers, our seeding solutions deliver the next-generation performance you need to help you reach the full potential of each seed. That’s our commitment to you.
</div>

Integration advantages of Deere tractor, cart, tool and technology

<div>
The tank on the N500C has been moved up and back to allow for better access to the meters. The blower fan has been relocated to the front of the tank to allow non-obstructed access to all four meters.
The updated tank design is also larger. The 9.15-m (30-ft) to 11-m (36-ft) models offer a 3523.9 -L (100-bu) tank. The 12.2-m (40-ft) and 12.8-m (42-ft) models offer a 4228.7-L (120-bu) tank.
Tank cleanout has also been improved. Producers can place a seed box or conveyer under the tanks to empty out excess seed. The tank has been designed so there is minimal seed left in the tank after it has been emptied.
Calibrating the meters has also been improved thanks to electric drive metering. The N500C is calibrated stationary similar to larger air carts. Catch bags are placed under each meter, and the meters turn a pre-determined amount of revolutions. Catch bags are weighted and entered into the EquipmentPlus app or on the Gen 4 display in order to generate a meter displacement value (MDV).
</div>

Improved meter access with new frame design

<div>
For the first time, meter sections are controlled with electric motors. Each meter section has its own electric drive motor. This eliminates the need for a variable-rate drive hydraulic motor or a ground drive wheel. This also enables the SectionCommand system and variable/prescription seeding.
Prescription/variable-rate seeding allows growers to apply the right amount of seed depending on predetermined management zones. Four-section SectionCommand has shown a potential seed savings of 4 to 6 percent depending on field size and shape.
<h5>Power generation</h5>
The electric motors are powered by a power take-off (PTO) power generation unit or an onboard hydraulic power generator. Growers can choose either of these options based on their tractor limitations. The on-board system utilizes power beyond, whereas the PTO system frees up hydraulic capacity on the tractor as the PTO powers the generator.
</div>

Electric drives enabling SectionCommand™ system

<div>
The more frequently you calibrate your seeding equipment, the more accurate it will be. With ActiveCal, available only from John Deere on the N500C and C-Series Air Carts, you can do all the calibration from your cab to minimize variation in product metering. It takes only minutes, so there’s no need for back-and-forth trips to the cart. ActiveCal is designed to recalibrate itself throughout your work day to give you confidence in changing product weight and weather conditions.
 
A number of variables, including product weight and changing climate conditions throughout the day, will have an effect on any volumetric metering system; with the John Deere ActiveCal system, calibration can be done from the cab of the tractor, while seeding, to minimize the variation in product metering.
 
The process to calibrate the implement starts with the Gen 4 4600 CommandCenter™ Display in the work setup page, where the operator defines product types, rates and selects meter rollers. Based on information entered into the work setup page, a preconfigured meter displacement value (MDV) will populate per meter. An initial manual calibration will give the most accurate MDV to start with. However, the preconfigured MDV will be a good starting point for growers who do not wish to manually calibrate.
 
The operator engages ActiveCal while stationary by selecting the button on the screen and then begins seeding. When enough product has been metered out, typically after about  3.2 to 4.9 ha (8 to 12 acres), the Gen 4 CommandCenter will prompt the operator to stop when convenient to do so. At that time, the data points are calculated and a new MDV with percent difference is displayed on screen. The operator can accept or reject the new MDV. If accepted, the system automatically calibrates to the new MDV. If rejected, the system continues at the previously calibrated numbers.
</div>

Calibrate from the cab with the John Deere ActiveCal™ system

<div>
Tank scale weights and meter calibrations can be completed from an Android™ or iOS® mobile device anywhere around the machine.
Tank scale weights can be viewed anywhere within 15.2 m (50 ft). The EquipmentPlus app can also be used to calibrate the tank scales as needed.
<h5>Initial meter calibration</h5>
Select the meters that toned to be calibrated. Calibrations are recommended every morning or when crops/seed sizes are changed.
Follow the on-screen prompts to complete the calibration.
Once the catch bags are in place, hold down the meter calibration switch until the number of revolutions is complete.
Enter the weights of the bags into the app.
The EquipmentPlus app will calculate MDV based on the number of revolutions and the product weights. Operators can choose to accept the proposed MDV values or not.
 
Android is a trademark of Google LLC. iOS is a trademark of Cisco Technology, Inc. used under license by Apple Inc.
</div>

EquipmentPlus mobile app

<div>
With RelativeFlow Blockage sensing, operators can see the flow of both seed and fertilizer from inside the tractor cab. Sensors on all secondary hoses monitor the relative product flow row to row, giving you a better view of the flow rate of both seed and fertilizer from the cart to the opener from inside your tractor cab. This technology can help you identify any problems before a potential blockage occurs.
 
RelativeFlow Blockage is available in all run configurations on the following models (all widths):  
<ul>
<li>H500</li>
<li>H500F</li>
<li>P500</li>
<li>P600</li>
<li>N500</li>
<li>N500F</li>
<li>N500C</li>
<li>730LL</li>
</ul>
 
RelativeFlow Blockage is compatible with hydraulic drive carts: model year 2014 and newer 1910, all 19,381.5-L (550-bu) 1910 Carts, and C650 and C850 Air Carts.
 
Below are the Gen 4 display screens for the blockage monitoring system. For complete details and information, see the owner’s manual.
The RelativeFlow Blockage sensing chart shows the amount of flow through each sensor on the selected tower. Sensitivity for the blockage system can be adjusted if desired, as shown below.
Blockage warning sensitivity allows the producer to set and change the sensitivity of the sensors to meet their preferences and varying crop/fertilizer types. Increasing the sensitivity means the system is more likely to show a false blockage, while less sensitivity means the system is more likely to miss a blockage.
 
Multiple run-page alarm behavior options are available for selection.
Below are the Gen 4 display screens for the blockage monitoring system on the N500C.
 
For complete details and information reference, the owner’s manual.
The SeedStar™ system run page displays the five major run settings. Clicking on any of the tiles will take an operator to that specific page (shown below).
Blockage alarm delays can be set up by clicking on the advanced settings button from the blockage set-up screen.
<ul>
<li>A blockage delay is how long a blockage should occur before an alarm is sounded.</li>
<li>The blockage alarm reminder is how often the alarm should sound when a blockage occurs.</li>
<li>The meter on delay is the time from when the meter is turned on until the blockage sensor should start monitoring for blockage.</li>
<li>The meter off delay is the time from when the meter is turned off until the blockage sensor should start monitoring to verify no flow.</li>
</ul>
For more detailed information, see the owner’s manual.
 
Air tools with RelativeFlow Blockage are not compatible with 1910 air carts with ground drive.
 
</div>

Confidence in rates from row to row with RelativeFlow™ Blockage sensing

<div>
TruSet downforce allows operators to set downforce pressures from inside the cab. Downforce can easily be changed by the push of a button as soil conditions very. Proper downforce is directly related to a consistent seeding depth, which leads to improved even emergence, plant density, and maturity.
<h5>TruSet system quick-reference guide</h5>
TruSet downforce settings:
A. Select to manually input a value
B. Select to increase or decrease the target force of the openers
C. Downforce toggle button: select to enable or disable the downforce
D. Indicates that the downforce is enabled
E. Indicates that the downforce is disabled
F. Indicates that the downforce is enabled but not applying
</div>

Improve seed placement accuracy from the cab with TruSet™ downforce control

<div>
The N500C offers 33&#215;15.5R16.5 tires standard on all machines, resulting in better floatation and less compaction and allowing operators to get into the field sooner and stay in the field longer. The mainframe is also equipped with walking beams to allow for better ground following.
<table class="table table-striped table-bordered">
<tbody>
<tr>
<td>Option code</td>
<td>Width</td>
<td>Mainframe front tire size</td>
<td>Number of tires</td>
<td>Mainframe rear tire size</td>
<td>Number of tires</td>
<td>Wing frame tire size</td>
<td>Number of tires</td>
</tr>
<tr>
<td>3610</td>
<td>All</td>
<td>33&#215;15.5R16.5</td>
<td>4</td>
<td>33&#215;15.5R16.5</td>
<td>4</td>
<td>31&#215;13.5R15</td>
<td>4</td>
</tr>
<tr>
<td>3611</td>
<td>All</td>
<td>33&#215;15.5R16.5</td>
<td>4</td>
<td>33&#215;15.5R16.5</td>
<td>4</td>
<td>31&#215;13.5R15</td>
<td>8</td>
</tr>
<tr>
<td>3612</td>
<td>9.5/11-m (30/36-ft)</td>
<td>33&#215;15.5R16.5</td>
<td>4</td>
<td>500/40R16.5</td>
<td>4</td>
<td>33&#215;15.5R16.5</td>
<td>8</td>
</tr>
<tr>
<td>3613</td>
<td>12.2/12.8-m (40/42-ft)</td>
<td>500/40R16.5</td>
<td>4</td>
<td>500/40R16.5</td>
<td>4</td>
<td>33&#215;15.5R16.5</td>
<td>8</td>
</tr>
</tbody>
</table></div>

Get into the field sooner and stay longer with high floatation tires

<div>
The N500C is designed for no-till seeding. The N500C with SeedMetering2 offers accurate volumetric metering in a compact tank-mounted-on-frame design, with the convenience of the Central Commodity System (CCS™) bulk-fill capabilities.
 
The N500C is available in single- or dual-rank designs, with 9.15-m, 11-m, 12.2-m, and 12.8-m (30-ft, 36-ft, 40-ft, and 42-ft) working widths. The single-rank N500C is available in 38.1-cm (15-in.) row spacing, making for a highly productive soybean seeding machine, while the dual-rank models are available in 19-cm or 25.4-cm (7.5-in. or 10-in.) row spacings. The dual-rank models also feature an optional dual row spacing package, which allows them to seed in their standard spacing or lock-up one rank and seed in 38.1-cm or 50.8-cm (15-in. or 20-in.) row spacings.
 
The productivity of the CCS comes standard with the N500C. The CCS bulk-fill tanks feature 3523.9-L (100-bu) capacity on the 9.15-m (30-ft) to 11-m (36-ft) models. The 12.2-m (40-ft) and 12.8-m (42-ft) models offer 4228.7 L (120 bu) of capacity to allow operators to seed more acres before stopping to refill.
 
The N500C features the Pro-Series™ No-Till Openers. With well over one million no-till openers in the field today, this proven opener offers accurate seed placement with the exclusive active hydraulic downforce ground-following system while minimizing moisture loss with its low-disturbance opener design.
</div>

Versatile machine configurations

<div>
The ProSeries Opener is John Deere’s most advanced opener for your seed and separate fertilizer placement. When it comes to seeding precision, consistent seed depth, and uniform emergence in virtually all field conditions, you can superSEED your expectations with ProSeries.
 
Two of the three daily grease points were removed. The only remaining grease point is a yearly interval. The narrow seed boot travels behind the shadow of the blade, causing less soil disturbance. When attaching the boot to the shank, the bolt has been replaced with a flag pin. Now the flag pin is the wear point, not the casting, reducing overall maintenance. The seed press wheel is also redesigned; it has a narrow profile, a double-wall bearing, and is made of a flexible material. The quick-change blade feature reduces the time it takes to change each blade, saving time and money. Lastly, the seed tab is UV resistant and profiled similar to the trench. There is also the added option of the serrated closing wheel.
ProSeries Openers are in base equipment on all N500 and N500F Separate Fertilizer Placement (SFP), N500C, 1990 Central Commodity System (CCS™), and 1590 Air Drills.
 
The ProSeries Openers:
<ul>
<li>Work not only in no-till conditions, but also in minimum or reduced-till conditions</li>
<li>Provide 51 mm (2 in.) of free travel in the opener before spring down pressure takes over
<ul>
<li>Benefit: allows the opener to move over uneven ground conditions and minimize the chance of the gauge wheels bulldozing soil in soft or mellow conditions</li>
<li>The opener spring travels a maximum of 203-mm (8-in.) up or 150-mm (6-in.) down before the hydraulics react to uneven seedbeds</li>
</ul>
</li>
</ul></div>

Specifications
Working widths	11 m36 ft
Spacing	Dual rank: 7.5-in. (19.1 cm) spacing; 10-in. (25.4 cm) spacingSingle rank: 15-in. (38.1 cm) spacing
Number of ranks	Single; Dual
Openers	StyleNo-tillRank lock-upIndividualDiameter45.7 cm18 in.Down pressure74.8-181.4 kg/opener (165-400 lb)Dual rank - 7.5-in. (19.1 cm) spacing: 58Dual rank - 10-in. (25.4 cm) spacing: 44Single rank - 15-in. (38.1 cm) spacing: 28
Working widths	11 m36 ft
Spacing	Dual rank: 7.5-in. (19.1 cm) spacing; 10-in. (25.4 cm) spacingSingle rank: 15-in. (38.1 cm) spacing
Number of ranks	Single; Dual