- Easier serviceability with modular-design cutterbar
- Updated design and styling
- Reduce service time with Quick Change Knives
- Steel roll conditioners
- Impeller, urethane, V-10 conditioners or Tri-Lobe conditioners
Specifications | |
---|---|
PTO speed | 1000 rpm |
1000 rpm 1-3/8 in. PTO | 100-150 hp75-112 kW |
Standard hitch | Rockshaft swivel |
Optional hitch | Drawbar swivel |
Hydraulic pressure required | 15,513 kPa2,250 psi |
Cutterbar - cutting width | 4.5 m14.5 ft |
Number of disks/knifes | 918 |
Transport width | 4.5 m14.5 ft |
Tractor connection | 21 spline |
Standard hitch | Rockshaft swivel |
Optional hitch | Drawbar swivel |
Hydraulic pressure required | 15,513 kPa2,250 psi |
Type | John Deere |
Cutting width | 4.5 m14.5 ft |
Cutting height | 1.6-11.8 cm0.63-6.7 in. |
Number of disks | 9 |
Number of knives | 18 |
Disk speed | 2,650 rpm |
Knife tip speed | 307 km/h191 mph |
Disk drive | Gear |
Lubrication | Hy-Gard oil |
Oil reservoir capacity | 10.4 L11 U.S. qt |
Cutterbar oil check | Combination sight glass, drain plug |
Angle adjustment | Manual or hydraulic |
Angle range | 2-8 degree (angle) |
Cutterbar protection | ShearHub |
Adjustable gauge shoes | Yes |
Width | 268 cm106 in. |
Diameter | 59.5 cm23.4 in. |
Tines type | V-tines |
Number of tines | 72 |
Number of speeds | Two |
Drive | 3-V powerband belt and sheaves |
Width | 269 cm106 in. |
Diameter | 25.4 cm10 in. |
Type of material | Urethane or Steel |
Design | Urethane: Recessed cleat, Steel Intermeshing flutes (V-10 and Tri-Lobe) |
Speed | 800 rpm |
Drive | Telescoping shaft |
Transport width | 4.5 m14.5 ft |
Transport length | 8.8 m28.9 ft |
Weight, roll conditioner | With Urethane roll conditioner: 3,161 kg6,969 lbWith V-10 steel roll conditioner: 3,270 kg7,209 lbWith tri-lobe steel roll conditioner: 3,325 kg7,330 lb |
Weight, impeller conditioner | 3,078 kg6,785 lb |
Standard tires | 31x13.5-15, 8PR |