C400 Mower-Conditioner
Make:
John Deere
Model:
C400 Mower-Conditioner
- Reduce service time with Quick Change Knives
- Updated design and styling
- Decreased horsepower and fuel requirements due to lighter weight1
- Easier serviceability with modular-design cutterbar
- Impeller, urethane or V-10 conditioners
Specifications | |
---|---|
PTO speed | 1000 rpm |
1000 rpm 1-3/8 in. PTO | 95-150 hp71-112 kW |
Standard hitch | Rockshaft swivel |
Optional hitch | Drawbar swivel |
Hydraulic pressure required | 15,513 kPa2,250 psi |
Cutterbar - cutting width | 4 m13 ft |
Number of disks/knifes | 816 |
Transport width | 4 m13 ft |
Tractor connection | 21 spline |
Standard hitch | Rockshaft swivel |
Optional hitch | Drawbar swivel |
Hydraulic pressure required | 15,513 kPa2,250 psi |
Type | John Deere |
Cutting width | 4 m13 ft |
Cutting height | 2.0-9.5 cm0.8-3.8 in. |
Number of disks | 8 |
Number of knives | 16 |
Disk speed | 2,650 rpm |
Knife tip speed | 307 km/h191 mph |
Disk drive | Gear |
Lubrication | Hy-Gard oil |
Oil reservoir capacity | 9.5 L10 U.S. qt |
Cutterbar oil check | Combination check, drain plug |
Angle adjustment | Manual or hydraulic |
Angle range | 2-8 degree (angle) |
Cutterbar protection | ShearHub |
Adjustable gauge shoes | Yes |
Width | 268 cm106 in. |
Diameter | 59.5 cm23.4 in. |
Tines type | V-tines |
Number of tines | 72 |
Number of speeds | Two |
Drive | 3-V powerband belt and sheaves |
Width | 279 cm110 in. |
Diameter | 25.4 cm10 in. |
Type of material | Urethane or Steel |
Design | Urethane: Recessed cleat, Steel: Intermeshing flutes V-10 |
Speed | 800 rpm |
Drive | Telescoping shaft |
Transport width | 4 m13 ft |
Transport length | 8.2 m26.9 ft |
Weight, impeller conditioner | 2,934 kg6,470 lbWith Urethane roll conditioner: 2,996 kg6,605 lbWith V-10 Steel roll conditioner: 3,086 kg6,805 lb |
Standard tires | 11L-15 standard31x13.5L 15, 8PR |