<ul>
<li>Available in the following models:
<ul>
<li>Standard (dry hay)</li>
<li>Silage</li>
</ul>
</li>
<li>BaleTrak™ Pro-monitor controller</li>
<li>Exclusive DiamondTough™ triple weave belts</li>
</ul>

450M Round Baler

Agriculture

<ul>
<li>AutoConnect™ deck compatible for deck attach/detach in seconds</li>
<li>Cab or Open Station configuration available</li>
<li>PowrReverser™ or E-hydro transmission with Twin Touch™ pedals</li>
</ul>

3039R Compact Utility Tractor

Key Features
<ul>
<li>Engine Power: 125 hp</li>
<li>Easy to use transmission</li>
<li>NEW integrated technologies (JDLink™, AutoTrac™)</li>
<li>NEW optional suspended front axle</li>
</ul>

5125r-tractor

5125R Utility Tractor

Key Features
<ul>
<li>Engine Power: 115 hp</li>
<li>Easy to use transmission</li>
<li>NEW integrated technologies (JDLink™, AutoTrac™)</li>
<li>NEW optional suspended front axle</li>
</ul>

5115r-tractor

5115R Utility Tractor

Key Features
<ul>
<li>Engine Power: 100 hp</li>
<li>Easy to use transmission</li>
<li>NEW integrated technologies (JDLink™, AutoTrac™)</li>
<li>NEW optional suspended front axle</li>
</ul>

5100r-tractor

5100R Utility Tractor

Key Features
<ul>
<li>Engine Power: 90 hp</li>
<li>Easy to use transmission</li>
<li>NEW integrated technologies (JDLink™, AutoTrac™)</li>
<li>NEW optional suspended front axle</li>
</ul>

5090r-tractor

5090R Utility Tractor

Key Features
<ul>
<li>PowrQuad PLUS 16F/16R or Powr8 32F/16R transmission options</li>
<li>Climate-controlled cab</li>
<li>Hitch lift capacity of 6,970 lbs. with an option of 7,860 lbs.</li>
<li>Integrated AutoTrac™ guidance</li>
</ul>

5115m-powrquad-pluspowr8-utility-tractor

5115M Utility Tractor

<div class="key_features">Key Features
<ul>
<li>PowrQuad PLUS 16F/16R or Powr8 32F/16R transmission options</li>
<li>Climate-controlled cab</li>
<li>Hitch lift capacity of 6,970 lbs. with an option of 7,860 lbs.</li>
<li>Integrated AutoTrac™ guidance</li>
</ul>
</div>

5100m-powrquad-pluspowr8-utility-tractor

5100M Utility Tractor

<ul>
<li>PowrQuad PLUS 16F/16R or Powr8 32F/16R transmission options</li>
<li>Climate-controlled cab</li>
<li>Hitch lift capacity of 6,970 lbs. with an option of 7,860 lbs.</li>
<li>Integrated AutoTrac™ guidance</li>
</ul>

5090m-powrquad-pluspowr8-utility-tractor

5090M Utility Tractor

<ul>
<li>2WD or MFWD</li>
<li>5-year Powertrain warranty*</li>
<li>Available in premium cab, standard cab or open operator station</li>
<li>No Regen required</li>
</ul>

5067E Utility Tractors

<div class="key_features">
<ul>
<li>67 engine hp</li>
<li>Best-in-class visibility</li>
<li>Thick comfortable seat</li>
<li>5-Year Powertrain Warranty</li>
</ul>
</div>
<a class="no_show_m btn btn-larger btn-primary btn-product btn-raq various" href="https://www.agprocompanies.com/new-equipment/agriculture/tractors/5-series-tractors/small-frame/5065e-utility-tractor/#inquire">REQUEST A QUOTE</a>

5065e-utility-tractor

5065E Utility Tractor

Hay and Forage

<ul>
<li>Available in the following models:
<ul>
<li>Standard (dry hay)</li>
<li>Silage</li>
</ul>
</li>
<li>BaleTrak™ Pro-monitor controller</li>
<li>Exclusive DiamondTough™ triple weave belts</li>
<li>Exclusive COVER-EDGE™ surface wrap option</li>
</ul>

550M Round Baler

<ul>
<li>Use front hitch for maximum productivity</li>
<li>High-speed rotary disc cutterbar for cutting in tough conditions</li>
<li>Conditioning and swath delivery</li>
<li>Windrowing solutions to match any needs</li>
</ul>

R950R Rear Mount Mower-Conditioner

<ul>
<li>235hp</li>
<li>Integrated AutoTrac™ steering system helps maintain crop quality even at faster cutting speeds</li>
<li>JDLink™ enabled</li>
<li>Optional 24mph transport speed</li>
</ul>

W235M Windrower

560M Round Baler

<ul>
<li>Reduce service time with Quick Change Knives</li>
<li>Updated design and styling</li>
<li>Impeller, urethane or V-10 conditioners</li>
<li>Cutting platform is gear-driven</li>
</ul>

S300 Mower-Conditioner

<ul>
<li>260 hp</li>
<li>Integrated AutoTrac™ steering system helps maintain crop quality even at faster cutting speeds</li>
<li>JDLink™ enabled</li>
<li>TouchSet™ for in cab adjustments</li>
<li>Transport speed up to 24 mph</li>
</ul>

W260R Windrower

F350R Front Mount Mower-Conditioner

<ul>
<li>Reduce service time with Quick Change Knives</li>
<li>Updated design and styling </li>
<li>Easy serviceability with modular-design cutterbar</li>
<li>Gear-driven cutting platform</li>
<li>Impeller conditioning</li>
</ul>

S250 Mower-Conditioner

<ul>
<li>MegaWide™ HC² feed system with Precutter</li>
<li>BaleTrak™ Pro monitor-controller</li>
<li>Exclusive DiamondTough™ triple weave belts</li>
<li>Exclusive COVER-EDGE™ surface wrap option</li>
</ul>

460M MegaWide™ HC² Round Baler

<ul>
<li>16 ft 4 in. (5 m) cutting width</li>
<li>Reduce service time with Quick Change Knives</li>
<li>Easier serviceability with modular-design cutterbar</li>
<li>Improve windrow formation and reduce ash content with overshot cross auger</li>
<li>Urethane, V-10 conditioners or Tri-Lobe conditioners</li>
</ul>

C500 Mower-Conditioner

Hay and Forage Baling Equipment

<ul>
<li>Standard (dry hay)</li>
<li>ISOBUS monitor</li>
<li>Exclusive DiamondTough™ triple weave belts</li>
<li>Driven by Diamond® Chain for superior performance</li>
</ul>

560R Premium Round Baler

<ul>
<li>2.2m MegaWide™ pickup for better shaped bales and improved crop pickup in wide, windblown, or scattered windrows.</li>
<li>Designed by John Deere specifically for the application, the moisture sensor is the industry’s most accurate across the full range of moisture levels.</li>
<li>BalerAssist™ drivetrain system option allows you to hydraulically back out plugs with a remote.</li>
<li>With the Bale Mobile App, get real-time yield mapping, bale documentation, geo-tagging for retrieval and bale monitoring.</li>
</ul>

L331 Large Square Baler

<ul>
<li>MegaWide™ HC² feed system with industry-exclusive 5&#8242; precut bales</li>
<li>ISOBUS monitor</li>
<li>Exclusive DiamondTough™ triple weave belts</li>
<li>Driven by Diamond® Chain for superior performance</li>
</ul>

560R MegaWide™ HC² Premium Round Baler

<ul>
<li>2.2m MegaWide™ pickup for better shaped bales and improved crop pickup in wide, windblown, or scattered windrows.</li>
<li>Optional 2.5m Premium MegaWide™ pickup, tooth-to-tooth, is the widest in the industry.</li>
<li>Designed by John Deere, the moisture sensor is the industry’s most accurate across the full range of moisture levels.</li>
<li>BalerAssist™ drivetrain system option allows you to hydraulically back out plugs with a remote.</li>
<li>With the Bale Mobile App, get real-time yield mapping, bale documentation, geo-tagging for retrieval and bale monitoring.</li>
</ul>

L341 Large Square Baler

<ul>
<li>MegaWide™ HC² feed system with Precutter</li>
<li>BaleTrak™ Pro-monitor controller</li>
<li>Exclusive DiamondTough™ triple weave belts</li>
</ul>

560M MegaWide™ HC² Round Baler

<ul>
<li>Full-width feeding pickup</li>
<li>Adjustable hay compressor</li>
<li>Deep-flighted auger feeding</li>
<li>Accurate knotters</li>
</ul>

328 Twine Baler

John Deere

<ul>
<li>Mow up to 2 acres</li>
<li>23 HP* (17 kW) V-Twin engine</li>
<li>48- and 54-in. (122- and 137 cm) forged Accel Deep™ Mower Decks available</li>
<li>20-inch (50.8 cm) high-back custom-tailored seat with arm rests</li>
<li>LED lights, floor mat, front bumper, rear hitch, covered storage come standard</li>
<li>3-year/200-hour bumper-to-bumper warranty**</li>
</ul>

Z330R ZTrak™ Mower with 48-in. Deck

<ul>
<li>Mow up to 2 acres</li>
<li>23 HP* (17 kW) V-Twin engine</li>
<li>48- and 54-in. (122- and 137 cm) forged Accel Deep™ Mower Decks available</li>
<li>20-inch (50.8 cm) high-back custom-tailored seat and standard rear hitch</li>
<li>3-year/200-hour bumper-to-bumper warranty**</li>
</ul>

Z330M ZTrak™ Mower with 48-in. Deck

<ul>
<li>48-inch (122-cm) floating mower deck</li>
<li>Powerful 19 hp (14.2 kW) V-twin engine</li>
<li>Self-propelled hydrostatic drive system</li>
<li>Easy-to-use controls for operator comfort and convenience</li>
</ul>

W48R Commercial Walk-Behind Mower

Rippers

Semi-Mounted Rotary Rakes

Horizontal Fold Disc Mowers

Front Mounted Disc Mowers

Professional-Duty Roadside Mowers

Vari-Manager Series

Vertical Fold Disc Mowers

Landscape and Estate Shredders

Trailed Round Bale Wrappers

Trailed Square Bale Wrappers

View Product Brochure

Harvesting equipment, cutters, shredders, hay &amp; forage equipment, planting &amp; seeding equipment, sprayers and tillage equipment

BALR: Farm Equipment

<div>
 <h5>Round baler models</h5>
 
 <table class="table table-striped table-bordered">
 <tbody>
 <tr>
 <td>Model</td>
 <td>Bale size</td>
 <td>Available pickups</td>
 </tr>
 <tr>
 <td>450E</td>
 <td>1.2 x 1.5 m (4 x 5 ft)</td>
 <td>Regular</td>
 </tr>
 <tr>
 <td>450M</td>
 <td>1.2 x 1.5 m (4 x 5 ft)</td>
 <td>Regular, MegaWide™ Plus</td>
 </tr>
 <tr>
 <td>460M</td>
 <td>1.2 x 1.8 m (4 x 6 ft)</td>
 <td>MegaWide Plus, MegaWide HC2</td>
 </tr>
 <tr>
 <td>460R</td>
 <td>1.2 x 1.8 m (4 x 6 ft)</td>
 <td>MegaWide Plus, MegaWide HC2</td>
 </tr>
 <tr>
 <td>550M</td>
 <td>1.5 x 1.5 m (5 x 5 ft)</td>
 <td>Regular, MegaWide Plus</td>
 </tr>
 <tr>
 <td>560M</td>
 <td>1.5 x 1.8 m (5 x 6 ft)</td>
 <td>Regular, MegaWide Plus</td>
 </tr>
 <tr>
 <td>560R</td>
 <td>1.5 x 1.8 m (5 x 6 ft)</td>
 <td>Regular, MegaWide Plus, MegaWide HC2</td>
 </tr>
 </tbody>
 </table>
 <h5>Round baler model specification</h5>
 
 <table class="table table-striped table-bordered">
 <tbody>
 <tr>
 <td>Baler option</td>
 <td>Applicable models</td>
 </tr>
 <tr>
 <td>E = Economy 
 <ul>
 <li>Dry hay only</li>
 </ul></td>
 <td>450E</td>
 </tr>
 <tr>
 <td>M = Standard 
 <ul>
 <li>Dry hay</li>
 <li>Silage</li>
 <li>Precutter</li>
 </ul></td>
 <td>450M, 460M, 550M*, and 560M</td>
 </tr>
 <tr>
 <td>R = Premium 
 <ul>
 <li>Dry hay</li>
 <li>Precutter</li>
 </ul></td>
 <td>460R and 560R</td>
 </tr>
 </tbody>
 </table>
 *NOTE: The 550M Round Baler will only be available in dry hay and silage configurations. 
 </div>

0 Series Round Balers - Model specification levels

<div>
 
 The 0 Series Round Baler family welcomes the first, John Deere, North-American built precutter. This feed system in front of these machines is the MegaWide HC2. The MegaWide Plus name is known as the industry-leading feed system since its introduction with the 7 Series Balers. John Deere continues that legacy with the 0 Series. Proven designs of the MegaWide were maintained and improvements were made to key components to gain significant capacity.
 <h5>Features of the MegaWide HC2</h5>
 
 The MegaWide™ HC2 will only be available in a precutter configuration (available on the 450M, 460M, 460R, 560M, and 560R models):
 <ul>
 <li>1.22-m (4-ft) wide machines will have 14 knives</li>
 <li>1.52-m (5-ft) wide machines will have 20 knives</li>
 </ul>
 The MegaWide HC2 has the same 2.2-m (7.22-ft) MegaWide Plus pickup from the 9 Series. Dry hay and silage 0 Series configurations will also have the MegaWide Plus pickup.
 
 Before the introduction of the MegaWide HC2 , the cam-clutch protection for the driveline was only available on the 9 Series Premium Balers. It is in the base for the MegaWide HC2 precutter configurations. This driveline pushes the limitations of the baler and the MegaWide HC2 system by offering the best machine protection John Deere can provide. Another feature brought over from the 9 Series Premium Balers and being offered on the 0 Series is the grease banks. All daily greasing can be done from the ground in one central location.
 
 The roller baffle on the MegaWide HC2 doubled in size from the MegaWide Plus from 10.2-cm (4-in.) to 20.3-cm (8-in.) diameter to allow for increased speeds and performance in larger windrows.
 
 The 450M, 460M, 460R, 560M, and 560R Balers that can be configured with the MegaWide HC2 feed system will have the same flare-to-flare pickup width of 2.2 m (7.21 ft). This 2.2-m (7.21-ft), flare-to-flare, width on 1.22-m (4-ft) balers is only a feature of the MegaWide HC2 feed system.
 
 The primary rotor is only available on the MegaWide HC2  and is located directly behind the MegaWide pickups.
 <ul>
 <li>This rotor grabs the crop and drags it over the knives to size the crop to a theoretical length size of 66 mm (2.5 in.)
 <ul>
 <li>For the 1.22-m (4-ft) machines, there are 14 slots to receive the knives that are located on the floor of the feed system</li>
 <li>The 1.52-m (5-ft) machine has 20 knives and 20 slots</li>
 </ul></li>
 </ul>
 
 Industry-exclusive, fast-pitch augers have been placed on the primary rotor to move dry hay and silage past the transition points to avoid plugging.
 
 The secondary rotor is another component on the feed system that was re-designed from the MegaWide Plus feed system to handle the increased demands of the high-capacity system.
 <ul>
 <li>The secondary rotor in the MegaWide HC2 is similar in location and design as the MegaWide Plus spiral rotor.</li>
 <li>The hex shaft on secondary rotor rotor on the MegaWide HC2 was increased from 3.2 cm (1.25 in.) from the MegaWide Plus to 3.8 cm (1.5 in.)</li>
 <li>The diameter of the tube was increased for additional strength and to prevent silage wrapping</li>
 <li>The number of tines was increased from two to three for additional capacity and flow of crop into the starter roll and chamber.</li>
 </ul>
 
 Drop floor – if the baler exceeds capacity and plugs, the MegaWide HC2 can lower the knife floor from the cab of the tractor to easily feed the plug into the chamber.
 <ul>
 <li>Drop floor is an insurance policy to allow the operator to push the machine knowing that a plug can clear in 30 seconds, not 30 minutes.</li>
 <li>In factory-observed testing with the 2016 test fleet, 99 percent of the plugs were cleared from the cab.</li>
 <li>Floor is self-cleaning – when lowered to feed a plug, it allows chaff that has been built up around the knives to fall through into the windrow.
 <ul>
 <li>This release of crop allows the feed system to stay cleaner</li>
 <li>Allows for easier engagement of the knives and servicing of the knives</li>
 </ul></li>
 <li>The floor is also responsible for engaging the knives
 <ul>
 <li>Based on lack of success for re-engaging knives in competitive machines, John Deere made sure the MegaWide™ HC2 was built to meet the demands a Deere producer expects.</li>
 <li>Knife-engagement forces on the MegaWide™ HC2 are 10 times that of the New Holland™ Roll-Belt™ 460 CropCutter® Baler. It gives the producer the confidence that if the knives are engaged, they are all up and cutting.</li>
 <li>Once the knives are up, each knife has individual spring protection, limiting bent or broken knives.</li>
 <li>Hit a rock and the knife moves out of the way and automatically re-engages.</li>
 </ul></li>
 </ul>
 
 A third drive roll is another feature that will only be offered with the MegaWide HC2 feed system.
 <ul>
 <li>Precutting crop releases additional moisture into the feed system of the baler so the MegaWide HC2 feed system added a third drive roll on the number 11 roller to ensure trouble-free bale formation even in the most difficult, high-moisture silage conditions.</li>
 <li>This feature is available only on the MegaWide HC2 feed system</li>
 </ul>
 
 All MegaWide HC2 feed systems will have silage components to limit maintenance and prevent crop build up on belts.
 <ul>
 <li>Driven auger</li>
 <li>Starter roll scraper knife</li>
 <li>Auxiliary take up roller</li>
 <li>For precutter machines only - external belt guides</li>
 <li>External belt guides were designed to dramatically reduce amount of chaff in the gate</li>
 <li>Available through parts – retrofittable through 7 Series balers</li>
 </ul>
 
 Increased torque – the MegaWide HC2 feed system required an additional drive configuration to power the primary rotor and to meet the capacity goals.
 <ul>
 <li>The MegaWide HC2 feed system has a T gearbox where the MegaWide Plus has a 90 degree box.</li>
 <li>The MegaWide Plus system had a cut-out clutch that protected the spiral rotor and pickup.</li>
 <li>The MegaWide HC2 eliminated that clutch because the secondary rotor is more robust than the MegaWide Plus spiral rotor.
 <ul>
 <li>This allowed the primary and secondary rotor to be driven directly from the driveline.</li>
 <li>Both components are still clutch protected from the main driveline cam clutch, but there is approximately 10 times more torque being put through the primary and secondary rotor than what is found on the MegaWide Plus spiral rotor.</li>
 <li>This exponential change in torque is the driving force of the capacity gains in the MegaWide HC2 feed system.</li>
 <li>MegaWide HC2   pickup is still clutched for extended pickup life. That clutch is now located on the left-hand side of the baler. MegaWide Plus pickup clutches are still located on the right-hand side of the baler.</li>
 </ul></li>
 </ul>
  MegaWide HC2 feed systems will not have the adjustable crank handle for the pickup.
 <ul>
 <li>MegaWide Plus machines will continue to have this an option.</li>
 </ul>
 <h5>Descriptive model numbering system</h5>
 
 All 0 Series Balers use alpha-numeric identifiers for the model names:
 <ul>
 <li>The MegaWide HC2 can be ordered on mid specification (M) and premium specification (R) balers.</li>
 <li>R specification balers will have the premium pickup with improved internal components that are covered under the 2-year/12,000-bale premium warranty</li>
 <li>M specification balers and pickups will not contain premium baler components – exception for this is the MegaWide HC2 feed system will have the premium cam clutch for the driveline and grease banks.</li>
 </ul>
 For more information about the model specifications, see the chart below:
  
 <table class="table table-striped table-bordered">
 <tbody>
 <tr>
 <td>Baler option</td>
 <td>Applicable models</td>
 </tr>
 <tr>
 <td>E = Economy 
 <ul>
 <li>Dry hay only</li>
 </ul></td>
 <td>450E</td>
 </tr>
 <tr>
 <td>M = Standard 
 <ul>
 <li>Dry hay</li>
 <li>Silage</li>
 <li>Precutter</li>
 </ul></td>
 <td>450M, 460M, 550M*, and 560M</td>
 </tr>
 <tr>
 <td>R = Premium 
 <ul>
 <li>Dry hay</li>
 <li>Precutter</li>
 </ul></td>
 <td>460R and 560R</td>
 </tr>
 </tbody>
 </table>
 *NOTE: The 550M is only available in dry hay and silage configurations. New Holland, Roll-Belt, and CropCutter are trademarks of CNH Global N.V. and its subsidiaries.
 </div>

MegaWide™ High Capacity and Cutting (HC2) feeding system

<div>
 
 A MegaWide Plus pickup is available on 450M, 550M, and 560M Round Balers. It is base equipment on the 450M Silage, 550M Silage, 460M, 460M Silage, and 560M Silage Balers. The MegaWide Plus pickup is also incorporated into the new MegaWide High Capacity and Cutting (HC2) high-capacity precutter feed system. 0 Series Balers have implemented specification levels for all models in the baler lineup, similar to what was done when the 459E was introduced. Pickup options will remain the same for the model's equivalent specification. The precutter pickups will have the same MegaWide Plus pickups that will be offered in mid specification (M) or the premium specification (R) balers.
 
 MegaWide Plus pickups make baling easier, especially in wide or windblown windrows, and increases productivity; more hay volume means more bales per hour.
 <ul>
 <li>Flare-to-flare width of 1.8 m (5.9 ft) on balers with a 1.2 m (4-ft) wide bale chamber</li>
 <li>The MegaWide HC2 Precutter feed system on the 460M offers a 2.2 m (7.2-ft) wide flare-to-flare pickup width; 20 percent wider than our previous offerings on the 1.2-m (4-ft) wide balers.</li>
 <li>MegaWide Plus pickup makes it easier to produce better-shaped bales and improves crop pickup in wide, windblown, or scattered windrows</li>
 <li>Mega teeth, located at the ends of the pickup, pull crop around the flares when baling wide or windblown windrows</li>
 <li>MegaTough pickup teeth provide greater strength and durability</li>
 <li>Exclusive square design handles high-impact loads without yielding</li>
 <li>Sturdy toothbar design</li>
 <li>Self-adjusting roller baffle</li>
 <li>Spiral rotor-feed system improves feeding in all crop conditions</li>
 <li>Chain driven for positive feeding</li>
 <li>Cut-out clutch protected</li>
 <li>Semi-pneumatic gauge wheels</li>
 </ul>
 
 Mega and MegaTough pickup teeth are base equipment:
 <ul>
 <li>Mega teeth, at the ends of the pickup, are heavy-duty for long life and improved crop retrieval</li>
 <li>MegaTough pickup teeth are designed to withstand the harshest baling conditions and provide long service life</li>
 </ul>
 
 The 1.2-m (4-ft) balers use a full-length, reinforced toothbar design. The 1.5-m (5-ft) balers use a heavy, C-channel construction. The pickup toothbars are divided into two half-sections that mount to a center spider for increased strength and even crop feeding.
 
 Available only on the MegaWide Plus pickup, the patented roller baffle is self-adjusting and produces smoother crop flow across the pickup. The roller also improves crop pickup in small windrows and prevents roll ahead of crop. When combined with the MegaWide Plus pickup, this feeding system allows increased ground speed with less chance of plugging for increased productivity in all field conditions.
 <ul>
 <li>Self-adjusting</li>
 <li>Smooths crop for even flow across pickup</li>
 <li>Allows for faster ground speed with less chance of plugging</li>
 <li>Increases operator productivity</li>
 </ul>
 
 The MegaWide Plus pickup uses a rotor-feeding assembly, which mounts behind the pickup for smooth and even crop flow into the bale chamber.
 <ul>
 <li>Augers and rotor teeth are driven on the same shaft, eliminating the need for additional drives.</li>
 <li>The rotor is fixed to the baler frame, allowing positive and even feeding into the bale chamber.</li>
 <li>Large-diameter converging augers have high crop-flow capacity, and auger scrolls help to force crop into the chamber.</li>
 <li>Spiral design enhances feeding in uneven windrows and reduces loading on the rotor.</li>
 </ul>
 
 Rotor strippers allow crop to be lifted from the rotor teeth into the chamber without cutting or wrapping the crop.
 
 The MegaWide Plus pickups and spiral rotor are chain-driven for positive bale starts with cutout clutch protection. The pickup is being driven off the drive roll and bypasses the starter roll. This will allow for reduced wear and breakage of the starter roll chain.
 
 Semi-pneumatic gauge wheels provide smooth ground gauging over uneven terrain and protection to the pickup.
 <ul>
 <li>Stiffer rubber sidewalls</li>
 <li>No air pressure to maintain, which mean no flat tires</li>
 <li>Adjustable to meet pickup tooth-to-stubble height requirements</li>
 </ul>
 The pickup float springs are positioned for excellent flotation.
 <ul>
 <li>Adjustable to meet varying field conditions</li>
 <li>Float springs only support the pickup reel
 <ul>
 <li>Rotor assembly is fixed to the baler frame, eliminating additional weight on the pickup system</li>
 </ul></li>
 </ul>
 
 The adjusting crank positions the pickup to the desired operating height to match crop or field conditions. An optional hydraulic pickup lift cylinder is available as an attachment.
 <ul>
 <li>Makes raising for transport or clearing obstructions easy</li>
 <li>Crank handle serves as a down stop</li>
 <li>Adapts to regular, MegaTooth and MegaWide Plus pickups</li>
 <li>Hydraulic pickup lift comes standard on premium machines</li>
 </ul>
 </div>

MegaWide™ Plus pickup with MegaTough™ pickup teeth offers super capacity

<div>
 
 A silage-configuration baler allows the producer to put up silage hay. A silage configuration machine does not offer a precutter. There are three major components to a silage configuration baler: a staggered roller-auger kit (1), a starter roll-scraper knife, and a screen (2). The powered auger sits above the staggered roll on the baler to help keep wet hay from traveling up the belts and reduce buildup on the roll. The screen is bolted on the front of the baler as a safety feature. The knife/scraper is mounted in front of the starter roll to help prevent wrapping of wet crop on the starter roll. The silage kit is offered as a bundle for field installation if the baler is not ordered as a silage-configuration machine from the factory. Attachment BE32442 is for 1.22-m (4-ft) wide machines and BE32443 is for1.52-m (5-ft) wide machines. Also offered is a high-moisture kit. This kit does not include the same components that are on the silage-configuration balers. It offers the starter roll-scraper knife but does not include the staggered roll-auger kit. Attachment BE23828 is for 1.22-m (4-ft) machines and BE23829 is for 1.52-m (5-ft) machines.
 
 Base equipment on: 450M Silage, 550M Silage, 460M Silage, 560M Silage, 450M Precutter, 460M/R Precutter and 560M/R Precutter.
 
 Auxiliary take-up rolls prevent belt crossover and flipping in wet conditions. This roll is base equipment on all silage and precutter configuration balers. It also comes with the bale ramp bundle on the 440E and 450E Balers.
 <h5>Precutter configuration</h5>
 
 The 0 Series Round Baler family welcomes the first, John Deere, North-American built precutter. This feed system in front of these machines is the MegaWide HC2. The MegaWide Plus name is known as the industry-leading feed system since its introduction with the 7 Series Balers. John Deere continues that legacy with the 0 Series. Proven designs of the MegaWide were maintained and improvements were made to key components to gain significant capacity. The MegaWide™ HC2 will only be available in a precutter configuration (available on the 450M, 460M, 460R, 560M, and 560R models):
 <ul>
 <li>1.22-m (4-ft) wide machines will have 14 knives</li>
 <li>1.52-m (5-ft) wide machines will have 20 knives</li>
 </ul>
 The MegaWide HC2 has the same 2.2-m (7.22-ft) MegaWide Plus pickup from the 9 Series. Dry hay and silage 0 Series configurations will also have the MegaWide Plus pickup.
 </div>

Silage configuration

<div>
 
 Mounted in front of the baler wheels and directly below the bale chamber, the pickup hugs the ground for clean crop retrieval. Hay movement is minimized.
 <ul>
 <li>V-belt driven</li>
 <li>450E and 450M Baler pickups are 116.6 cm (45.9 in.) wide</li>
 <li>550M and 560M Baler pickups are 156 cm (61.4 in.) wide</li>
 <li>Large reel shaft and reel bearing</li>
 </ul>
 The small-diameter, low-profile pickup allows for good ground gauging and clean crop retrieval.
 <ul>
 <li>Handles large, heavy windrows of hay and high-moisture crops</li>
 <li>Feeds hay directly to the forming chamber to reduce crop loss</li>
 <li>Low-profile pickup minimizes hay lift to reduce chaffing and retain hay quality</li>
 </ul>
 Side flares prevent hay from blowing off the pickup ends, which reduces hay loss. The closely-spaced pickup teeth extend to the baler side sheets to help build straight-edged bales. Standard on regular pickups, compressor rods are contoured to control hay over the pickup radius for positive feeding. The compressor rack can be adjusted upward or downward to match the volume of material in the windrow and can be easily removed to match crop conditions.
 
 The adjusting crank positions the pickup to the desired operating height to match crop or field conditions. An optional hydraulic pickup lift cylinder is available as an attachment.
 <ul>
 <li>Makes raising for transport or clearing obstructions easy</li>
 <li>Crank handle serves as a down stop</li>
 <li>Adapts to regular and MegaWide™ Plus pickups</li>
 <li>Hydraulic pickup lift comes standard on premium machines</li>
 </ul>
 NOTE: Crank is not an option for the MegaWide High Capacity and Cutting (HC2) feed system.
 </div>

Regular pickup offers large feed opening and low-profile, mid-mounted pickup

<div>
 <h5>Audible alarm</h5>
 
 The BaleTrak Pro monitor-controller is included with the automatic electric twine tie option and the Edge-to-Edge net wrap option on the 450E Baler. The monitor sounds an alarm for near-full, full, and oversized bales.
 <ul>
 <li>Monitor beeps once to notify the operator to even-up the bale prior to reaching the desired size.</li>
 <li>Monitor beeps twice when the bale reaches the desired size.</li>
 <ul>
 <li>If the operator continues to feed hay into the baler, the monitor will sound continuously to warn of an oversized bale.</li>
 </ul>
 <li>Bale shape bars are not available on the 450E Round Balers. The 450E Round Balers allow for adjustment of twine settings from the cab by using the BaleTrak Pro Monitor.</li>
 <li>The number of wraps on the Edge-to-Edge net wrap option on the 450E can be set with the BaleTrak Pro.</li>
 </ul>
 The audible level of the monitor can be adjusted.
 </div>

Automatic electric-tie option using BaleTrak™ Pro monitor allows for more productivity

<div>
 
 The 0 Series Round Balers came standard with an adjustable hitch and this feature will continue to be in base with the 0 Series Round Balers. This feature allows the hitch height to be adjusted to optimize crop-feeding performance. Due to the wide array of tractor tire sizes and drawbar heights, hitch adjustment may be necessary to get the proper feed opening of the baler. The adjustable hitch eliminates the need for the 51-mm (2-in.) thick tractor drawbar kit (AE57344) because it has a wider opening. Benefits of the adjustable hitch:
 <ul>
 <li>Ability to match baler to numerous tire sizes</li>
 <li>Allows for drawbar height to fall within 330 mm to 559 mm (13 in. to 22 in.) from the top of the drawbar to the ground</li>
 <li>Eliminates narrow feed opening on the baler which can cause plugging</li>
 <li>Allows pickup head to follow terrain without missing crop</li>
 </ul>
 All eight bolts must be used when adjusting the hitch. There are four different positions as shown below:
 
 
 Also standard on all 0 Series Round Balers, except the 450E, is the drawbar shield. This helps to eliminate hay from getting caught on the hitch of the baler. The drawbar shield is designed to allow the operator to remove or attach the flap without having to unhook the baler from the tractor.
 
 </div>

Adjustable hitch to match wide array of tractor drawbar heights

<div>
 
 As the hay enters the forming chamber from the pickup, belts immediately turn the hay to form a tight, dense core. Incoming hay then feeds between the bale and the lower gate roll. Hay is tightly compressed into smooth, dense layers as it enters the bale. Chaffing is greatly reduced to prevent loss and retain hay quality in the bale.
 
 The idler arm rises with bale growth, forcing oil from the hydraulic cylinder through a pressure-relief valve to maintain uniform bale density throughout the bale-forming process.
 </div>

Vertical forming chamber maintains uniform bale density

<div>
 
 John Deere's 178-mm (7-in.) wide diamond-tread design ensures fast bale starts and grips the bale to prevent slippage and reduce chaffing. The treads are self-cleaning to reduce carryover. The belts are staggered to reduce the loss of fine material and are closely spaced to contain the hay for fast, easy starts. The belts enclose 91 percent of the bale width to reduce loss of fine material and retain hay quality. The staggered belt roll design enables any loose hay under or behind the belts to be returned to the pickup and into the baler. This design helps to prevent buildup at the front of the baler, which could cause hay loss and belt or splice damage.
 
 Every baler in the 0 Series Family uses DiamondTough belts. Belts are constructed using a patented triple-weave process of nylon and polyester materials. They have the strength to handle heavy shock loads and help maintain consistent belt length. The DiamondTough belts are more puncture and tear resistant than other belts on the market and provide improved belt life and reliability.
 <h5>Plate-type fasteners</h5>
 
 All of the 0 Series Balers use the plate-type fasteners. This closed-loop design uses a plate fastener with pre-assembled rivets that lock the fasteners into the belt, providing a powerful vice-type grip on the belt.
 <ul>
 <li>The plates and rivets are manufactured from high-tensile stainless steel.</li>
 <li>Strong belt splices mean less maintenance and more productivity.</li>
 <li>The loop area is cold forged, making it extremely wear resistant in the coupling area, resulting in a very long cycle life.</li>
 <li>The spring steel pin is notched and locks into the splice connection without having to bend the pin or use external retainers.</li>
 </ul>
 </div>

Exclusive DiamondTough™ belts with plate-type splices

<div>
 
 The gull wing doors from the 9 Series Premium Balers have been removed. All M- and R-specification 0 Series Balers will have the same stamped, steel door design.
 <h5>Factory-installed grease bank</h5>
 
 Standard on premium round balers is a factory-installed grease bank. This allows the operator to only have to grease eight zerks (four on each side of the baler) for grease zerks that were hard to reach on previous models. The operator will still have to grease the driveline and some other components on the baler.  NOTE: The grease bank will also be found on all 0 Series precutter configuration balers, M and R specification.
 <h5>Third bale-shape sensor</h5>
 
 The 460R Premium and 560R Premium offer the producer a third bale-shape sensor that can be turned on or off. This will allow the operator to make consistent, square-shouldered bales since they can now see how the center of their bales are forming.
 <h5>ISOBUS system</h5>
 
 The ISOBUS system offered on the premium round balers allows the operator to use the latest technology when baling. They can utilize their GreenStar™ 2600, GreenStar 2630, GreenStar 1800, or certain R-Series CommandCenter displays as their baling monitor and can switch between tractors without having to take the display with them. All information for the baler is stored on the controller.
 <h5>Warranty</h5>
 
 A two-year or 12,000-bale warranty comes standard on 460R Premium and 560R Premium Round Balers only. Please see full product warranty for more details.
 </div>