1835 Air Hoe Drill

Make:

John Deere

Model:

1835 Air Hoe Drill

Choice of ground-engaging openers
Parallel Tracking™ or AutoTrac™ compatibility
Focused on proper air hose routing
Additional operators manuals and decal kit

Specifications
Spacing and width #1	Spacing: 25.4 cm10 in.Width: 40-ft. 0-in. (12.2 m)
Spacing and width #2	Spacing: 25.4 cm10 in.Width: 15.2 m50 ft
Spacing and width #3	Spacing: 25.4 cm10 in.Width: 60-ft. 0-in. (18.3 m)
Road clearance with sweep	15 in.381 mm
Transport width	20 ft6.1 m
Nominal mainframe width (between wing-fold pivots)	4.19 m13.75 ft
Number of seed openers	Openers link
Spacing and width #1	Working width12.2 m40 ftTransport height with harrow19.01 ft5.79 mMinimum temporary height reduction with sweeps508 mm20 in.Weight29,000-lb. (13,150 kg) (weight with typical options)Spacing: 25.4 cm10 in.Width: 12.5 m41 ft
Spacing and width #2	Working width15.2 m50 ftTransport height with harrow16.53 ft5.04 mMinimum temporary height reduction with sweeps508 mm20 in.Nominal inner wing width (between wing-fold pivots)3.08 m10.1 ftWeight37575-lb. (17040 kg) (weight with typical options)Spacing: 25.4 cm10 in.Width: 15.2 m50 ft
Spacing and width #3	Working width18.3 m60 ftTransport height with harrow19.4 ft5.91 mTransport height without harrow19.40-ft. (5.91 m)Minimum temporary height reduction with sweeps508 mm20 in.Nominal inner wing width (between wing-fold pivots)4.14 m13.59 ftWeight41,425-lb. (18,790 kg) (weight with typical options)Spacing: 25.4 cm10 in.Width: 18.6 m61 ft
Type #1	Spacing254 mm10 in.Dimensions31.75 x 50.8 x 711 mm1.25 x 2 x 28 in.Trip force550-lb. (2.4 kN)TruPosition™ - 51 degree (angle)
Underframe clearance	71.12 cm28 in.
Type #1	Spacing508 mm20 in.Blade size457 mm18 in.Fertilizer compatibilityAnhydrous gas, liquid, dryRolling disk
Centerframe width	4.19 m13.75 ft
Cross members	10.16 x 10.16 cm4 x 4 in.
End tubes	102 x 102 x 9.5 mm4 x 4 x 3/8 in.
Hitch	102 mm x 102 mm x 9.5mm 4 x 4 x 3/8-in
Hitch category	Category 4 (2-in. [50 mm]Pin) or Category 5 ( 2-3/4-in. [70 mm])
Seeding tool depth control	Adjustable mechanical stop
Mainframe and wing flexibility	Diagonal flex
Minimum SCVs	3
Tractor hydraulic circuit requirements	One selective control for frame lift; one selective control for wing fold and transport wheels, one for SFP rockshaft control
Tractor hydraulic pressure requirement	2500 psi/min (40-ft. - 60-ft.)
40-ft.	242.35 kW325 hp
50-ft.	298.3 kW400 hp
60-ft.	354.2 kW475 hp