1600 Turbo Series III Wide-Area Mower
Make:
John Deere
Model:
1600 Turbo Series III Wide-Area Mower
- Turbocharged diesel engine
- B20 compatible
- Rear-discharge decks
- FT4 engine compliant
Specifications | |
---|---|
Engine Manufacturer/model | 4TNV86CT-DJWM (T4) |
Engine Power | Gross power SAE J1995 at 3,000 rpm, PS 60 hp44 kW |
Fuel tank capacity | 22 U.S. gal./hr83.3 L |
Mower deck Size | 62, 94, 128 in.157, 239, 325 cm |
Blade tip speed | 13,000 fpm3,962 m/min |
Transmission | Hydrostatic |
Speed range | 0-15 mph0-24 km/h |
Drive tires | 26x12-12 |
Caster wheels | Four, 11x4-5, flat-freeTwo, 11x4-5, flat-free |
Warranty | 24 monhs |
Model | 4TNV86CT-DJWM (T4) |
Displacement | 127.6 cu in.2.091 L2,091 cc |
Bore and stroke | 3.4x3.5 in.86x90 mm |
Injection | Direct |
Starting aid | Engine glow plug |
Cylinders | Four |
Cycle | Four |
Power | Gross power SAE J1995 at 3,000 rpm, PS 60 hp44 kW |
Rated engine speed | 3,000 rpm |
Operating range | With isochronous governor 1,400-3,030 rpm |
Lubrication | Pressurized by lobe-style pump |
Oil filter | Spin-on |
Cooling | Liquid-cooled water centrifugal |
Cooling system capacity | 2.5 U.S. gal.7.5 L |
Crankcase capacity | 6.1 U.S. qt5.8 L |
Compression ratio | 19:01 |
Operating torque (net continuous @ 3000 rpm) | 103 lb-ft140 Nm |
Max Torque per SAE J1349 (net continuous) | 117.3 lb-ft159 Nm |
Air cleaner | Dual element, dry type |
Air restriction indicator | Standard, progressive type |
Engine shutoff | Key |
Radiator location | Rear mounted |
Radiator fins per inch | 10 fins per inch |
Fuel type | Diesel |
Fuel transfer pump | Electric |
Fuel filter | Replaceable, spin-on type |
Water separator | Replaceable, 100-mesh element |
Cold start device | Increased timing for better cold starting |
Fuel tank capacity | 22 U.S. gal.83.3 L |
Fuel pump type | Mechanical |
Fuel neck opening | 3 in.7.6 cm |
Fuel tank location | Left side of the machine |
Self bleeding | System is self-bleeding because of the electric fuel transfer pump |
Full load | 3.33 U.S. gal./hr12.7 L/hr |
One-half load | 1.93 U.S. gal./hr7.31 L/hr |
Type | Hydraulic, open center |
Lift cylinders | Bore 2 in.50.8 mm |
Pump | Gear |
Charging system | Automotive type |
Alternator | 75 amp |
Battery voltage | 12 V |
Battery cold crank amps | 675 CCA |
Starter size | 1.9 hp1.4 kW |
Traction drive pump | Displacement, axial piston pump, 3 cu in.49 cc |
Motor | Displacement, axial piston pump, 2 cu in.33 cc |
Type | Closed loop, hydrostatic |
Steering relief | 1,087 psi |
Implement relief | 1,600 psi |
Hydraulic reservoir capacity | 14 U.S. gal.53 L |
Transmission | Hydrostatic |
Transaxle type | Dual range |
Transaxle | Tuff Torque (Kanzaki) |
4 wheel drive | On demand or full time |
4 wheel drive type | Mechanical rear-wheel drive |
Differential lock | Mechanical, foot activated |
Final drive | Planetary |
Type | Internal, wet disc |
Steering brakes | Standard |
Parking brakes | Hand brake |
Speed range | 0-15 mph0-24 km/h |
Low forward speed | 0-9 mph0-14.5 km/h |
High forward speed | 0-15 mph0-24 km/h |
Low reverse speed | 0-4.5 mph0-7.2 km/h |
High reverse speed | 0-7.5 mph0-12 km/h |
With deck | 94 dBA |
Without deck | 89 dBA |
Frame type | Welded, tubular steel |
Thickness | 11 gauge0.12 in.3 mm |
Type | Power, hydrostatic |
Tilt steering wheel | Standard |
Turns lock-to-lock | 2.5 |
Turning radius | 39 in.99 cm |
Seat | Adjustment positionsMultiArmrestsYes, adjustableAir-ride suspension seat, adjustable, deluxe, high-backed, back angle adjustment, lumbar adjustment, standard armrests |
Safety | Safety interlock and operator presence system |
Drive tires | Pressure30 psi , 206.8 kPa (front)28 psi, 193.1 kPa (rear)26x12-12 |
Steering tires (rear) | 18x9.5-8 |
Tread | Multi-trac |
Ply rating | 6 PR (both) |
Length (with deck) | 132 in.335 cm |
Wheel base | 60 in.152 cm |
Tread width | 52 in.131 cm |
Width with decks down | 134 in.340 cm |
Height with ROPS | ROPS up, 98 in.249 cmROPS down, 74 in.188 cmWith four-post canopy ROPS, 82 in.208 cm |
Transport width | 84 in.213 cm |
Ground clearance | 6.5 in.16.5 cm |
Vehicle weight | 4,173 lb1,892.8 kg |
Machine weight without the deck | 3,264 lb1,474.2 kg |
Throttle | Hand |
Forward/reverse | Two-pedal |
Mower lift | Three two-function switches |
Park brake | Foot pedal/disk |
Indicator lights | Engine air heater, oil pressure light, engine temperature light, fuel gauge, hydraulic oil temperature light |
PTO engagement | TypeHydraulic, independentElectric solenoid switch |
PTO engagement/disengagement | Electric solenoid |
Deck drive pump | Displacement, axial piston pump, 2.48 cu in.40.6 cc |
Deck motor | TypeHydraulic, open center, closed loopDisplacement, gear motor, 2.5 cu in.41 cc |
Circuit | Series |
Deck drive type | Hydraulic, closed loop |
Spindles | Heat treated, diameter, 1 in.2.54 cm |
Spindle bearings greaseable | Yes |
Energy-absorbing wing decks | Yes |
Deck circuit | Series |
Blade drive | C-section, V-belt |
Size | 62, 94, 128 in.157, 239, 325 cm |
Center deck cutting width | 62 in.157 cm |
Wing deck cutting width | 42 in.107 cm |
Transport lock | Standard |
Discharge | Rear |
Deck construction | Fabricated steel |
Deck thickness | 7 gauge0.18 in.4.6 mm |
Height-of-cut range | 1-5.5 in.2.5-13.9 cm |
Wing deck float | Up (while maintaining PTO engagement)45 degreesDown (while maintaining PTO engagement)20 degrees |
Type | Flat-free |
Wing deck caster wheels | Four, 11x4-5, flat-free |
Front deck caster wheels | Two, 11x4-5, flat-free |
Total mower blades | Seven, three center and two each side |
Blade length | 22 in.55.88 cm |
Blade width | 2.5 in.6.35 cm |
Blade thickness | 0.312 in.0.79 cm |
Blade tip speed | 13,000 fpm3,962 m/min |
Interchangeable mower blades between all decks | Yes |
Warranty | 24 months |
Certification | ANSI B71.4 |